DIGIWAY PTY SW50-2S Kullanım Kılavuzu - Sayfa 4

Kapı Açıcı DIGIWAY PTY SW50-2S için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DIGIWAY PTY SW50-2S 17 sayfaları. Dual swing gate motor

1. General Descriptions and features

General descriptions

1.1

It is recommended reading and understanding this manual before start to install the control board.

Some features and idea are new. So, take some time to read through the manual to get better

understanding of the board. That will save your time during installation and get the best benefit

from the control board.

1.2 General features

SW50 is designed for most of domestic swing gate. It can be mounted on brick wall/pier or steel

post. The arm supplied can be met most of application situations. If special need, customer can

modify arm or ask supplier/dealer to contact manufacturer for different arm.

Before installation must check:

A) Gate moves freely by hand without any difficulty in either open and closing directions.

B) The post or pier must be strong enough.

C) Gate must have open and closed stopper

D) 240V 10A power point must be available within one metre of the post/pier

E) If there is not enough side room, minimum side room requirement see following drawing.

2. Motor installation

Two arms are the exactly same. For different gate or different application, can cut the arm to the

required length to suit the gate.

MAIN FEATURES

- 4 -