Epson 7800 - Stylus Pro Color Inkjet Printer Bildirim Sayfası - Sayfa 2

Yazıcı Aksesuarları Epson 7800 - Stylus Pro Color Inkjet Printer için çevrimiçi göz atın veya pdf Bildirim Sayfası indirin. Epson 7800 - Stylus Pro Color Inkjet Printer 4 sayfaları. Stylus pro 800 series
Ayrıca Epson 7800 - Stylus Pro Color Inkjet Printer için: Ambalajdan Çıkarma ve Kurulum Kılavuzu (27 sayfalar), Broşür ve Teknik Özellikler (8 sayfalar), Teknik Özellikler (4 sayfalar), Başlangıç Kılavuzu (10 sayfalar), Kullanıcı Kılavuzu (11 sayfalar), Hızlı Referans Kılavuzu (12 sayfalar), Tamamlayıcı Kılavuz (1 sayfalar), Sınırlı Garanti (12 sayfalar), Broşür ve Teknik Özellikler (8 sayfalar), Ürün Destek Bülteni (10 sayfalar), Broşür ve Teknik Özellikler (16 sayfalar)

Sayfayı Yazdır
Epson 7800 - Stylus Pro Color Inkjet Printer Bildirim Sayfası
About Platen Gap
In the Control Panel section of the Reference Guide, the description about Platen Gap on the Custom Paper
menu is incorrect. WIDEST is not supported, so read it as below.
You can adjust the distance between the print head and paper. Normally, leave this set to STANDARD.
If you find that printed images are smeared, select WIDE. Select NARROW for printing on thin paper, or
WIDER for printing on thick paper.
Note:
There is also Platen Gap on the Printer Setup menu, but this one supports WIDEST. Only Platen Gap on the
Custom Paper menu does not support WIDEST.
The setting will return to STANDARD after you turn the printer on and off.
Cleaning the Printer
In the Maintenance and Transportation section of the Reference Guide, we have added some more
information for Cleaning the Printer, so read it as below.
To keep your printer operation in its top condition, clean it thoroughly if it becomes soiled.
w
Warning:
Be careful not to touch the gears inside the printer.
c
Caution:
Never use alcohol or thinners to clean the printer; these chemicals can damage the components as well
as the case.
Be careful not to get water on the printer mechanism or electronic components.
Do not use a hard or abrasive brush.
Do not spray the inside of the printer with lubricants; unsuitable oils can damage the mechanism.
Contact your dealer or a qualified service person if lubrication is needed.
1. Make sure the printer is turned off and all the lights are off, and then unplug the power cord. Leave
the printer for a minute.
c
Caution:
Do not touch the following parts; otherwise, printouts may be soiled.
2
Roller
Ink absorption
Print head guide