Epson APJ29421 Montaj Talimatları Kılavuzu - Sayfa 4
Yazıcı Aksesuarları Epson APJ29421 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Epson APJ29421 21 sayfaları. Eco-flo continuous ink system
Sayfayı Yazdır
Step 1 Removing the Injector Lid
You will need to remove the printer lid on the injector carrier as shown illustrated from the diagrams below. Store
this somewhere safe should you ever wish to return the printer to its original setup.
The lid is held in place by two 'Lugs' on either side, once you have the LEFT side disconnected, the second lug can
ONLY be removed by using a sharp Stanley knife type and scoring the plastic within the head as illustrated in Fig.3.
Fig.1
Please note that the measurement and location of scoring would be inline with the THIRD GROOVE along as
indicated. When you have scored this several times take a fine screw driver as indicated in Fig.4 and very gently
praise the excess plastic piece off. Removing this excess piece will enable you to remove the lid by twisting this
towards you as illustrated in Fig.5.
rd
3
Groove
nd
Scoring point
2
Groove
st
1
Groove
Fig.3
INSTALLATION OF YOUR ECO-FLO KIT
Fig.5
4
Fig.2
Fig.4