Acuity Brands Lighting AAWB Manuel - Sayfa 11
Dış Mekan Işığı Acuity Brands Lighting AAWB için çevrimiçi göz atın veya pdf Manuel indirin. Acuity Brands Lighting AAWB 18 sayfaları.
Sayfayı YazdırInstallation Instructions
RSX LED
6.
Aim fixture as required and tighten the 7/16-14 SHC knuckle adjustment bolt using an approximately
38 ft-lbs. (See figure 14) For units with photocontrol receptacle, the fixture mounting/aiming angle must be
restricted from 0° to 45° from horizontal per ANSI C136.10-2010.
7.
Energize the luminaire to verify its operation and proper illumination of area.
WARNING: DO NOT MOUNT THE KNUCKLE FITTER TO A TENON OR BRACKET THAT IS MORE
THAN 5 DEGREES FROM VERTICAL. MOUNTING AT AN ANGLE GREATER THAN 5 DEGREES RE-
QUIRES USE OF A PROPERLY TIGHTENED THRU-BOLT AND LOCKNUT. FAILURE TO CORRECTLY
INSTALL COULD RESULT IN SERIOUS INJURY OR DEATH.
©2016 Acuity Brands Lighting, Inc.
All Rights Reserved.
Figure 14
Lithonia Lighting Outdoor
One Lithonia Way, Conyers, GA 30012
Phone: 800-279-8041 Fax: 770-918-1209
www.lithonia.com
Part Number: IM-459 Rev A
Revision Date: 8/29/19
Page #9