Epson CPD-8407 Kullanıcı Kılavuzu - Sayfa 36

Yazıcı Aksesuarları Epson CPD-8407 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson CPD-8407 44 sayfaları. Color calibrator

Measuring the chart and updating the profile

Follow these steps to complete the profile modification process:

1. Place the printout of the standard color chart you received

from your printing vendor on a flat surface with the included

black base paper behind it.

2. Select an empty block in the EPSON Profile Updater dialog

box by clicking

corresponding block of the color chart.

Note:

Make sure the sensor tip is placed flat and firmly on the paper.

3. Click the Calibration button, or press the measure button at

the top of the calibrator to measure the color.

Note:

Do not measure the sample chart under strong light or direct

sunlight as this could render the measurement inaccurate.

4. Repeat steps 2 and 3 until every block of the color chart is

measured, then click the Done button, or click Save File.

Note:

You can't save the file until you measure every block.

5. Type a name for the new file in the File Name box and click

Save.

4-4

Calibrating Your System to Another

it.

Place the sensor tip of the calibrator on the