Epson DLQ-3500 Hızlı Kılavuz - Sayfa 8

Yazıcı Aksesuarları Epson DLQ-3500 için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. Epson DLQ-3500 32 sayfaları. Epson serial impact dot matrix printers
Ayrıca Epson DLQ-3500 için: Kurulum Kılavuzu (31 sayfalar), Uyarı (1 sayfalar), Referans Kılavuzu (34 sayfalar)

Sayfayı Yazdır
Paper-Thickness Settings
Usually, set the paper-thickness lever to the
AUTO position as shown below; your printer
automatically adjusts itself to the thickness
of the paper loaded in the printer.
If you are not content with the printing
quality, especially when using special paper
such as multipart forms, you can manually
set the paper-thickness lever to the
appropriate position.
The higher the number you set the
paper-thickness lever to, the wider the space
between the platen and print head. If your
printout appears faint or characters seem
skipped or missing, this setting may be too
high. On the other hand, if the setting is too
low, your printout may appear smudged,
the paper may not feed correctly, or the
ribbon may become damaged.
The following table provides guidelines for
selecting the appropriate lever position for
the type of paper you are using.
EPSON DLQ-3500 Quick Guide
Paper type
Ordinary paper (single sheets or
continuous paper)
Multipart forms (carbonless)
2 parts (original + 1 copy)
3 parts (original + 2 copies)
4 parts (original + 3 copies)
5 parts (original + 4 copies)
6 parts (original + 5 copies)
7 parts (original + 6 copies)
8 parts (original + 7 copies)
Labels
Envelopes
Postcards
Continuous forms with labels
Overlapping multipart forms
Overlapping multipart forms with
labels
c
Caution:
Do not set the paper-thickness lever to
AUTO when using labels whose backing
sheet is exposed. Set it to the appropriate
position according to the table above.
Note:
❏ When Overlapping Forms is turned on in
the default-setting mode, the printer
automatically operates on AUTO function
even though the paper-thickness lever may be
set to another position.
Paper-Thickness Settings (1/2)
Paper-thickness
lever position
-1 to 1
0 or 1
1 or 2
2 to 4
3 to 5
Auto
4 to 6
5 to 8
6 to 9
2 or 3
2 to 7
2
Auto
Auto
Auto