Acuity Brands Lighting MA Manuel - Sayfa 15

Dış Mekan Işığı Acuity Brands Lighting MA için çevrimiçi göz atın veya pdf Manuel indirin. Acuity Brands Lighting MA 18 sayfaları.

Installation Instructions

RSX LED

AAWB/AAWSC INSTALLATION INSTRUCTIONS

NOTE: Luminaire can be tilted up to 90 degrees above horizontal

Tools Required:

• 9/64" Allen Wrench

• 5/32" Allen Wrench

• 3/16" Allen Wrench

• Flathead Screwdriver (AAWSC only)

Minimum Square Pole: 3.5" Face

Minimum Round Pole: 3.2" Diameter

CAUTION: APPLY A CONTINUOUS BEAD OF WEATHER – PROOF CAULKING BETWEEN MOUNTING BASE PLATE AND WALL TO

ENSURE WEATHER–TIGHT INTEGRITY OF ELECTRICAL COMPONENTS (See Fig 15a & 15b)

1. Install the wall-mount base plate, refer to steps 1-3 outlined in the WBA/WBASC installation instructions on sheet 9. Note

that the image above shows the AAWSC option.

2. Before mounting the luminaire, remove the arm cover (See figure 20 on the previous page) and unpack the luminaire input

wires, if necessary, to make routing supply wires into the arm cavity easier.

Lithonia Lighting Outdoor

One Lithonia Way, Conyers, GA 30012

Phone: 800-279-8041 Fax: 770-918-1209

www.lithonia.com

Part Number: IM-459 Rev A

Revision Date: 8/29/19

Page #13