Epson FX-870 Ürün Destek Bülteni - Sayfa 6
Yazıcı Aksesuarları Epson FX-870 için çevrimiçi göz atın veya pdf Ürün Destek Bülteni indirin. Epson FX-870 16 sayfaları. Commonly asked questions and answers
Ayrıca Epson FX-870 için: Ürün Destek Bülteni (20 sayfalar), Ürün Destek Bülteni (5 sayfalar), Teknik Özellikler (12 sayfalar), Montaj Kılavuzu (8 sayfalar), Ürün Destek Bülteni (8 sayfalar)
Sayfayı Yazdır
unless defined otherwise by the "ESC ( U command. Currently, the values for ml
and IT@ MUST be ml =2 and m2=0.
To determine the values for nl and n2 perform the following steps.
1.
Determine the desired vertical motion dii in inches.
2
Multiply the distance by 360.
3.
Divide the result by 256 using long division.
4.
The remainder in the quotient from step 3 is the value for n1.
5.
The whole number in the quotient from step 3 is the value for n2
EXAMPLE
1.
The desired distance is 1 inch.
2
3.
4.
5.
In the Basic programming language, the command would look like thii.
'Reverse" paper feed less than l/2 inch can be performed with this command. To
1.
Determine the desired vertical motion dice in inches.
2
Multiply the distance by 360.
3.
Divide the result by 256 using long division.
4.
Subtract the remainder in the quotient computed in step 3 from 256.
5.
The result from step 4 is the value for n1.
6.
PSB No: P-0082
Page: 6 of 14