Epson G740A Kullanıcı Kılavuzu - Sayfa 39

Yazıcı Aksesuarları Epson G740A için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson G740A 44 sayfaları. Color calibrator

The following dialog box appears:

number of steps

between 0% and 100%

Before measuring the custom chart, you need to enter

information about the chart in this dialog box.

3. Enter the number of color density steps between 0% and 100%

in your chart. If there are four or more steps, type 4.

4. Enter the density percentage for each step in the boxes as

shown below. If your sample has more than six total steps,

choose four suitable steps.

percentage of color density for each step

5. After you finish making the settings, click Apply.

6. Follow the steps under "Preparing to measure the standard

color chart" on page 4-1 from step 5. Then follow the steps

under "Measuring the chart and updating the profile" on

page 4-4

Calibrating Your System to Another

4-7