DIHL AR800 Series Kullanıcı Kılavuzu - Sayfa 7
Elektrikli Süpürge DIHL AR800 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DIHL AR800 Series 8 sayfaları. Cyclonic vacuum cleaner
Sayfayı Yazdır
Cleaning the Motor Filter
Turn off and unplug the vacuum cleaner.
1.
2.
Remove the dust container.
3.
Open the dust container cover and take the filter out.
4.
Hold the filter inside a dustbin and gently knock against the side.
5.
Place the motor filter back into its holder.
6.
Replace the filter cover by hooking it precisely from above first.
Then engage the lock by pressing until it audibly clicks into place.
Place the dust container back onto the cylinder vacuum cleaner.
7.
8.
Check that the dust container is securely seated.
IMPORTANT! Never use the vacuum cleaner without a motor filter.
Cleaning the Exhaust Air Filter
The HEPA exhaust air filter cleans the air a final time before it leaves
the vacuum cleaner. You can clean this filter as follows:
1.
Switch off the vacuum cleaner and disconnect the plug
from the mains. To do this always pull on the plug and not
on the cable.
2.
Remove the dust container.
3.
Open the exhaust filter cover and remove the HEPA filter.
4.
Rinse the filter under cold running water only, and allow to
dry for 24 hours.
5.
Put the filter back into place.
6.
Close the exhaust filter cover.
IMPORTANT! Never clean the HEPA filter with soap or cleaning agent.
exhaust filter
24
HRS
7
rotate