Epson LQ-1170 Ürün Destek Bülteni - Sayfa 2

Yazıcı Aksesuarları Epson LQ-1170 için çevrimiçi göz atın veya pdf Ürün Destek Bülteni indirin. Epson LQ-1170 20 sayfaları. Understanding and using escp/3 commands and syntax
Ayrıca Epson LQ-1170 için: Manuel (5 sayfalar), Ürün Destek Bülteni (20 sayfalar), Ürün Destek Bülteni (5 sayfalar), Teknik Özet (7 sayfalar), Kurulum Kılavuzu (1 sayfalar), Montaj Kılavuzu (8 sayfalar), Ürün Destek Bülteni (16 sayfalar)

ESC X m n1 n2 (Select Pitch and Point Size)

C X m n1 a is the command for selecting pitch and point size where m, nl and

spacing. The variable W" selects the point size and the variable "n2", at this time,

character pitch for all other values of %I", divide 360 by 91". For example, if rn=W

then 360 divided by 60 equals 6 and the character pitch is 6 characters per inch. If

example, if nl=20, the point size is 10. tf nl=48, the point size is 24. NOTE:

When selectina a Doirft size laraer than 24 (the value for nl is treater than 48L

select Drof3ortional wacina tm=ll for the character me&.

In the Basic programming language, the command would look like this.

character size. At this time, n2 is m zero (0).

PSB No: P-0082

Page: 2 of 14