Epson OP1 Manuel - Sayfa 33

Yazıcı Aksesuarları Epson OP1 için çevrimiçi göz atın veya pdf Manuel indirin. Epson OP1 44 sayfaları. Operator panel
Ayrıca Epson OP1 için: Güvenlik ve Kurulum (26 sayfalar)

Sayfayı Yazdır
Epson OP1 Manuel
4. Operation

4.8 Setup Screen

If the bottom right of the screen (operator firmware version display area) is touched while
the Startup screen is displayed, the screen for setting up the Operator Panel appears.
When you finished the setup, touch the <OK> button at the bottom right of the screen. To
cancel the setup and display the original state, touch the <Cancel> button at the bottom left
of the screen.
Startup screen
Setup screen
Language
This item switches the display language for each of the screens. Each touch of the language
display area successively switches the display language in the following order: English →
Japanese → German → French. The language set here is only for the titles, etc. that are
displayed in each screen. To display text strings that are issued in the system history or by
the Print command correctly, an Operator Panel configured with the appropriate code
pages* must be used.
The settings become valid when the system is next started up.
The initial setting at shipment from the manufacturer is English.
* For details on code pages, refer to 5.3 About Display Language.
OP1 Rev.1a
25