Epson P6000 - Multimedia Photo Viewer Ürün Destek Bülteni - Sayfa 9
Yazıcı Aksesuarları Epson P6000 - Multimedia Photo Viewer için çevrimiçi göz atın veya pdf Ürün Destek Bülteni indirin. Epson P6000 - Multimedia Photo Viewer 17 sayfaları. Surecolor p-series
Ayrıca Epson P6000 - Multimedia Photo Viewer için: Broşür ve Teknik Özellikler (6 sayfalar), Ürün Destek Bülteni (28 sayfalar), Temel Kullanım Kılavuzu (29 sayfalar), Kullanım Kılavuzu (46 sayfalar), Talimatlar (2 sayfalar)
Sayfayı Yazdır
Steps:
1. Install a blank memory card into a memory card reader/writer and copy the
"PSV5FIRM" folder (including all the files in the folder) to the root directory of the
memory card.
2. Verify that the battery is installed in the P-6000 or P-7000 viewer.
3. Connect the AC adapter to the viewer, but do not power it on.
4. After the firmware file has been copied to the memory card, insert the CompactFlash or
SD memory card into the viewer.
5. Press and hold down the "OK" and
shown below.
Warning:
Do not turn off the viewer or attempt to remove the battery or disconnect the
AC adapter at any time during the firmware update.
When you see the EPSON logo name, release the OK and
update will begin and take approximately 3.5 minutes to complete. The SubCPU
firmware update starts next and takes about 3.5 minutes to complete. During the
SubCPU firmware update, the blue activity LED will temporarily stop blinking; this is
normal. Once the firmware update is completed you should see this screen.
keys while sliding the "POWER" switch as
Page 3 of 4
PSB.2009.09.002
keys; the main firmware