Crow EDS-2000AM Kurulum Talimatları Kılavuzu - Sayfa 8
Güvenlik Sensörleri Crow EDS-2000AM için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Crow EDS-2000AM 18 sayfaları. Outdoor pir + mw detector
Ayrıca Crow EDS-2000AM için: Kurulum Talimatları Kılavuzu (18 sayfalar), Kurulum Talimatları ve Kullanım Kılavuzu (20 sayfalar)
Sayfayı Yazdır
7. Release the detector body from the metal bracket by
pulling the detector up and out.
9. Insert wires through provided access hole and wiring
channels. Attach the sealing sponge pad to the wire
opening from the rear side after the wires have been
connected and prior to final product affixing to the
mounted bracket.
11. Place the detector on the mounting bracket from top
side down and then lock the screw at the bottom.
8. Attach the rear bracket to the wall using mounting
screws.
10. Use double side adhesive washer before
re-mounting the detector on the back bracket.
12. If Pet immunity up to 15kg is desired do not install
the mechanical pet filter.
If Pet immunity up to 36kg is desired install the
mechanical pet filter. In this case, the AM option must
be turned off to avoid AM alarm.
8