Epson R300 - Stylus Photo Color Inkjet Printer Ürün Bilgi Formu - Sayfa 2

Yazıcı Aksesuarları Epson R300 - Stylus Photo Color Inkjet Printer için çevrimiçi göz atın veya pdf Ürün Bilgi Formu indirin. Epson R300 - Stylus Photo Color Inkjet Printer 4 sayfaları. Product information guide
Ayrıca Epson R300 - Stylus Photo Color Inkjet Printer için: Broşür (2 sayfalar), Manuel (12 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Hızlı Referans (4 sayfalar), Hızlı Referans (6 sayfalar), Broşür (2 sayfalar), Kullanıcı Kılavuzu (12 sayfalar), Ürün Destek Bülteni (6 sayfalar), Ürün Destek Bülteni (1 sayfalar), Broşür (2 sayfalar), Kurulum Talimatları Kılavuzu (12 sayfalar), Eğitim Kılavuzu (4 sayfalar)

Epson R300 - Stylus Photo Color Inkjet Printer Ürün Bilgi Formu
EPSON
4.
First Aid Measures
4.1
Eyes:
Immediately flush with room temperature, low pressure, clean water for at least 15 minutes. Seek
medical attention if eye irritation continues.
4.2
Skin:
Wash surface areas with soap and water. Wash soiled clothing before rewearing. Consult a physician
if irritation continues.
4.3
Inhalation: Remove subject to ventilated fresh air. Consult physician if necessary.
4.4
Ingestion: Seek medical advise; and attention if stomach continues to be upset.
5.
Fire Fighting Measures
5.1
Flammability:
5.2
Extinguishing Media:
5.3
Fire Fighting Instructions: No special fire fighting procedures are required other than breathing apparatus. No
6.
Accidental Release Measures
If a spill occurs, use sponges to wipe-up ink, then rinse area with damp cloth. Place waste in closed container for
disposal. Use proper ventilation. Do not dispose of waste to the sewer. No eye or skin protection required during
clean-up. Wash hands with soap and water.
7.
Precautions for Safe Handling and Use
Keep out of reach of children and do not drink ink. Do not store the cartridge in high or freezing temperatures. Keep
cartridge out of direct sunlight. Do not dismantle cartridge. Do not store cartridges with oxidizing agents or
explosives. Make sure cartridge is dry before insertion into printer housing.
8.
Exposure Controls and Personal Protection
8.1 Engineering Controls:
8.2 Exposure Controls:
8.3 Personal Protection:
9.
Physical and Chemical Properties of Ink Formulation
Appearance:
Odor:
pH:
Boiling point:
Freezing point:
Melting point:
Flash point:
Autoflammability:
Explosive properties:
PIS # T048120
Page 2 of 4
Flash point is greater than 230 deg. F / 110 deg. C (closed cup in accordance with
ASTM D3278)
Dry chemical or carbon dioxide
special explosion hazards are known.
None required
None required
None required when cartridges are used as intended
Black Liquid
None
9 - 10
Approximately 212 deg. F / 100 deg. C
Less than 32 deg. F / 0 deg. C
Less than 32 deg. F / 0 deg. C
Greater than 230 deg. F / 110 deg. C (closed cup, ASTM D3278)
None
None
Version 3.52 (USA)
Release Date 01/04