Epson R800 - Stylus Photo Color Inkjet Printer Ürün Bilgileri - Sayfa 16

Yazıcı Aksesuarları Epson R800 - Stylus Photo Color Inkjet Printer için çevrimiçi göz atın veya pdf Ürün Bilgileri indirin. Epson R800 - Stylus Photo Color Inkjet Printer 17 sayfaları. Product support bulletin(s)
Ayrıca Epson R800 - Stylus Photo Color Inkjet Printer için: Buradan Başlayın Kılavuzu (6 sayfalar), Kullanıcı Kılavuzu (12 sayfalar), Ürün Destek Bülteni (6 sayfalar), Ürün Destek Bülteni (1 sayfalar)

Sayfayı Yazdır

Epson R800 - Stylus Photo Color Inkjet Printer Ürün Bilgileri

Epson Stylus Photo R800

Cleaning the Printer

To keep your printer working at its best, you should clean it

several times a year.

1. Turn off the printer, unplug the power cord, and

disconnect the interface cable.

2. Remove all the paper, then use a soft brush to clean the

paper feeders.

3. Clean the exterior of the printer with a soft, damp cloth.

Keep the paper support and printer cover closed as you

clean the printer.

4. If you need to clean ink out of the inside of the printer, use

a soft cloth to clean only the black plastic area shown below:

Clean here

only

WARNING: Don't touch the gears or rollers inside the printer.

Caution: Never use a hard or abrasive brush, or benzine, alcohol, or

thinner for cleaning; they can damage the printer components and

case.

Don't get water on the printer components and don't spray or apply

lubricants or oils inside the printer.

Transporting the Printer

If you move your printer some distance, you need to prepare it

for transportation in its original box or a similar one. Follow

these steps:

1. If your printer will be transported and set up again within

5 days, you need to remove the ink cartridges. Follow the

steps on page 14 to remove all of the cartridges. Pack each

cartridge separately in a sealable plastic bag. Close the

cartridge cover and press the H ink button. The red H ink

light comes on. Wait until the ink cartridge holder locks in

the far right position

If your printer will be packed longer that 5 days, leave in the

ink cartridges. Go to step 2.

Epson Stylus Photo R800

16 -

2. Turn off the printer and unplug the power cord from the

electrical outlet. Then disconnect the printer cable from the

printer.

3. Open the printer cover and tape the ink cartridge holder to

the printer case using packing tape. Then close the printer

cover.

Caution: Be sure to remove the tape after installing the printer in

its new location.

4. Close the output tray and the paper support.

5. Repack the printer and its attachments in the original box

using the protective materials that came with them.

6. Keep the printer level as you transport it.

7. After transporting the printer, remove all the tape and

packing materials.

8. If you removed your ink cartridges, replace them as soon as

possible, as described on page 6. Then clean the print head

(see page 11) and let the printer sit for 24 hours to soften

any dried ink in the print head.

9. Test your printer. If you notice a decline in print quality,

clean the print head (see page 11); if output is misaligned,

align the print head (see page 15).

Epson R800 - Stylus Photo Color Inkjet Printer Ürün Bilgileri - Sayfa 16

Cleaning the Printer

Transporting the Printer

Related Documentation