Epson RC170 Manuel - Sayfa 26

Yazıcı Aksesuarları Epson RC170 için çevrimiçi göz atın veya pdf Manuel indirin. Epson RC170 44 sayfaları. Epson rc170 printer operator panel

4. Operation

If the Operator Panel is set as a control device, buttons for executing and stopping programs

are displayed on the Program Execution screen to enable these operations.

Program Execution screen (when operations from the Operator Panel are

available)

(14) Execute program

(13) Select program No.

(14) Execute program

(15) Pause program

(16) Cancel program

(17) Reset

(15) Pause program

This button is for selecting the number of the program to execute. Each touch of the

<←> or <→> buttons decrements or increments the currently displayed program

number. You can also directly input program numbers by touching the program

number.

This button is for executing the program. Touching this button starts execution of the

currently selected program.

This button also functions as the button for resuming execution of a paused program.

When you execute or resume program execution, a confirmation dialog box is

displayed.

This button is for pausing the currently executing program.

Resume execution of a paused program → Execute program button

Cancel a program → Cancel program button

This button is for cancelling the currently executing program.

This button is for resetting Emergency Stop state or Error state.

I/O output can also be reset. However, I/O output reset is not available at the

shipment setting from the manufacturer.

For details, refer to EPSON RC+ 5.0 User's Guide 5.12.2

(Setup Menu)-

Preferences Page .

Select program No

(13)

(17) Reset

(16) Cancel program

Controller Command

OP1 Rev.1a