Epson RC170 Manuel - Sayfa 43

Yazıcı Aksesuarları Epson RC170 için çevrimiçi göz atın veya pdf Manuel indirin. Epson RC170 44 sayfaları. Epson rc170 printer operator panel

6.5 About Gasket

The gasket is used for dust-proof and dip-proof performance.

- Gasket that is used for long periods of time or once has been installed on the panel is

NOTE

- The drip-proof performance (IP65 equivalent) is assured only when the gasket is

Replacement Procedure

(1) Put the Operator Panel on a horizontal place with

the display side down.

(2) Remove the gasket.

(3) Insert new gasket.

NOTE

Do not insert the seams of the gasket at the

corners of the Operator Panel.

Attach the gasket so that its seams come to the

bottom side the Operator Panel.

Make sure to check the mounting condition of

(4)

the gasket.

(The gasket

approximately 3.0 mm from the groove)

OP1 Rev.1a

scratched or dirty, and may not qualify IP65 dust-proofing and drop-proofing

performance. Replace the gasket periodically* for stable dust-proof and dip-proof

performance.

* Periodically: Yearly, or when obvious scratches or dirt is seen.

mounted properly to the groove.

evenly sticking out

6. Maintenance and Inspection

Gasket

Seams

3.0mm