Argos Opti Montaj ve Kullanıcı Talimatları - Sayfa 15
Fitness Ekipmanları Argos Opti için çevrimiçi göz atın veya pdf Montaj ve Kullanıcı Talimatları indirin. Argos Opti 19 sayfaları. Pro fitness dumbbell bench
Ayrıca Argos Opti için: Montaj ve Kullanıcı Talimatları (20 sayfalar), Hızlı Montaj (2 sayfalar), Montaj ve Kullanıcı Talimatları (20 sayfalar)
Sayfayı Yazdır
Exercise Information
Computer operation
BUTTON
Functions and Operations
1.Batteries Installation
Please install 2 piece of AAA 1.5V batteries in the battery case on the back of monitor.
(Whenever Batteries are removed, all the functions values will be reset to zero.)
Change the battery. To change the computer battery, please slide the computer from the computer holder, remove
the battery cover on the back of the computer console, and remove the batteries. Replace with AAA batteries.
Finally put the cover back on the console, and slide the computer back on the computer holder.
2.Auto On/Off
While the user starts to do exercise, the Display will show out the workout value automatically. Once stop
exercising over 256 sec, the Display will turn off, and all the function values will be held. While user starts
exercise again, the monitor will be wake up.
** Press the button for 2 seconds, all the function value except Odometer will be reset to zero.
3.Auto Scan
After the monitor is power on or press the button, the LCD will display all functions values from
TIME- SPEED-DISTANCE-CALORIES-ODOMETER-PULSE. Each value will be held for 6 seconds.
4.Speed
Display the current training speed from 0.00 to 999.9 km/h. User also can press the button to display
the Speed value.
5.Distance
Display the trip distance from 0.00 to 99.99 km. User also can press the button to display the distance
value.
6.Time
Display the workout time from 00:00 to 99:59. User also can press the button to display the workout time
value.
7.Calories
Display the calories consumption during training from 0.0 to 999.9. User also can press the button to display
the calories consumption value.
8.Odometer
Display the total accumulated distance from 0.0 to 9999. User also can press the button to display the
Odometer value
9.Pulse
Display the current heart rate in beats per minute.
10.Reset
Press the button for 2 seconds, all the function value except Odometer will be reset to zero.
Note:
1.If the computer displays abnormally, please re-install the battery and try again.
2.Battery Spec: 1.5V AAA (2PCS).
3.The batteries must be removed from the appliance before it is scrapped and that they are disposed of
safety.
4.WARNING! Heart rate monitoring systems may be inaccurate. Over exercise may result in serious injury
or death. If you feel faint stop exercising immediately".
1. Non-rechargeable batteries are not to be recharged.
2.
Rechargeable batteries are only to be
charged under adult supervision.
3. Rechargeable batteries are to be removed
from the product before being charged.
4.
Batteries are to be inserted with the correct polarity.
5.
Exhausted batteries are to be removed from
the product.
6.
Supply terminals are not to be short-circuited.
14