Crow FW2-SIREN2EXT-8/9F Kurulum Kılavuzu - Sayfa 13
Güvenlik Sistemi Crow FW2-SIREN2EXT-8/9F için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Crow FW2-SIREN2EXT-8/9F 19 sayfaları. Siren system
Sayfayı Yazdır
Installation Instructions
Installing the Transceiver
1. Choose a central location for the installation of the Transceiver to insure radio
2.
3. Place the unit on the installation surface and mark out the four screw holes.
4. Use a 6 mm bit to drill the holes.
Figure 5: Transceiver Unit
5. Power‐Off the control panel.
6. Wired the Transceiver to the Control Panel.
7. Power‐On the Control Panel.
8. Check the functionality of the system before installing the Siren Units.
coverage to all the Siren Units.
Open the Screw (See Figure‐6) and open the cover.
Figure 6: Transceiver Installation
11