Epson Spectroproofer Kurulum ve Bakım - Sayfa 4

Yazıcı Aksesuarları Epson Spectroproofer için çevrimiçi göz atın veya pdf Kurulum ve Bakım indirin. Epson Spectroproofer 36 sayfaları.
Ayrıca Epson Spectroproofer için: Sorun Giderme Kılavuzu (2 sayfalar)

Sayfayı Yazdır
Epson Spectroproofer Kurulum ve Bakım
4
|

Setting Up the SpectroProofer

Setting Up the
SpectroProofer
Warning:
The 44" SpectroProofer is
heavy. Two people are
required to lift it.
Caution:
Be sure to check the box
and packaging material
thoroughly for any missing
items; pieces may have
shifted during shipment.
Follow the steps in this section to install the SpectroProofer in your printer.
Before using the SpectroProofer for the first time, you must also initialize it
as described on page 16.

Unpacking and Assembly

Unpack the SpectroProofer and make sure you have all the parts shown
below:
Backing plates
(24" kit)
Mounting rails, bolts, and hex wrench
Power cord
SpectroProofer
main unit
OR
Spectrophotometer
(ILS30EP)
USB cable
4
Backing plates
(44" kit)
Calibration tile
and holder
Cable hooks