Crow CS-47 GSM Kullanıcı Kılavuzu - Sayfa 14

Aksesuarlar Crow CS-47 GSM için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Crow CS-47 GSM 20 sayfaları. Gsm phone line backup

Note: In order to receive messages as defined in the System OK area, the

user must send the Program Password to the system. This means that only

a user with the System Administrator password may activate such

messages.

a. Select the relevant option for sending messages. There are three

possible configurations:

• SMS request selected –the system sends the message at

the administrator's request.

• Enable selected –the message is sent automatically at a

predefined interval.

• Both SMS request and Enable selected –the system sends

messages both at a predefined interval, and at

administrator's request

b. In the Phone number field, enter the phone number to which the SMS

message will be sent.

c. In the Message field, enter the text of the SMS message.

d. If Enable was selected in Step 2a,the SMS message is sent repeatedly,

at a predefined interval. In the Interval field, enter the number of hours at

which the SMS message will be sent.

Note: This message can contain up to 15 characters, as noted in the Chars

Left field.

3.6.3 Configuration of the "phone line " area

In this area you define the parameters of the SMS that will be sent when

the PSTN line fail and when it restores.

a. Select the Enable checkbox.

b. In the Phone number field, enter the phone number to which the SMS

message will be sent.

c. In the Message field, enter the text of the SMS message.

d. In the Interval field, enter the number of minutes at which the SMS

messages will be sent. As long as this field is set to a value greater than

0,the SMS message is sent repeatedly, until the power flow returns to

normal.

Note: This message can contain up to 15 characters, as noted in the Chars

Left field.

Do the same for "phone line restored " message.