Argos VU-201 Kullanım Kılavuzu - Sayfa 11

Elektrikli Süpürge Argos VU-201 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Argos VU-201 16 sayfaları. Bagged upright vacuum cleaner

Sayfayı Yazdır

VU-201 Guide (amend Jan 2010).qxd:Value

TROUBLESHOOTING

PROBLEM

There is an accessory

missing

The vacuum cleaner

does not switch on

The vacuum cleaner won't

pick up

Dust is escaping from the

vacuum cleaner

Accessories wont pick up

dust/debris

The blockage indicator (if

applicable to model)

activates

For help, spares or assistance please call 0845 6042377

or visit www.bagsandfilters.com

13/1/10

POSSIBLE CAUSES

1. A part(s) is missing from box

1. The unit is not plugged into a mains socket

2. The power button on the unit has not

been depressed

3. The thermal motor cut out has been activated

4. There is no electricity to the power

socket

1. The accessories are not correctly fitted

2. There are blockages in the hose/accessory

3. The dirt container/dust bag is full

4. The filters are blocked/clogged

5. The carpet height adjust slider setting is not

correct

6. The belt is broken/brushbar not rotating

1. The filters/dust bag/dirt container are not

fitted correctly

2. The filters/dust bag are damaged

1. The wrong tool is fitted for the task

2. The tools are blocked

3. The filters are blocked

4. The dirt container/dust bag is full

5. The hose/tubes are blocked

1. The filters/dust bag/dirt container are blocked

2. The dust bag/dirt container is full

3. The accessories/hose/tube are blocked

14:39

Page 11

SOLUTIONS

1. Check the 'KNOW YOUR MACHINE' page

of your instructions

1. Ensure the plug is firmly in socket and

switched on

2. Depress the power switch on the unit

3 If the unit has cut out during use, disconnect

the unit from the wall socket, allow to cool for

one hour, clean the filters, empty bin/dust bag

and check the hose/accessories for blockages

4. Seek expert help from a qualified electrician

1. Check hose/tools are correctly attached to the

machine/hose/tube; refer to 'OPERATION' section

2. Check the air paths of the hose/accessory are

not obstructed by blockages

3. Check dirt container/dust bag and if necessary

empty/replace

4. Frequently cleaning filters will maintain

performance; see 'MAINTENANCE'

5. See 'OPERATION' for correct carpet height

setting for your carpet

6. Disconnect the unit from the power supply,

remove the floor head cover and check the belt

has not detached from the motor spindle or that

the belt is not worn/damaged; see

'MAINTENANCE'

1. See ' A SSEMBLY' and 'MAINTENANCE'

2. If the filters/dust bag are damaged these will

need to be replaced

1. See 'KNOW YOUR MACHINE'

2. Check the air paths of the tools are not

obstructed by blockages

3. Frequently cleaning filters will maintain

performance; check 'MAINTENANCE'

4. Check and empty the dirt container/replace

dust bag

5. Check the air paths of the hose/tubes are not

obstructed by blockages

1. Frequently cleaning filters will maintain

performance; check 'MAINTENANCE'

2. Check and empty dirt container/replace dust

bag

3. Check the air paths of the accessories/hose/

tubes are not obstructed by blockages