EPSON Stylus COLOR 600
Mechanical
Paper feed method Friction
Paper path
Sheet feeder, rear entry
Sheet feeder
capacity
100 sheets at 17 lb (64 g/m
Total print volume 75,000 pages (A4, Text)
Dimensions
Storage
Width: 16.9 inches (429 mm)
Depth: 10.8 inches (275 mm)
Height: 6.6 inches (168 mm)
Printing
Width: 16.9 inches (429 mm)
Depth: 24.1 inches (613 mm)
Height: 12.2 inches (309 mm)
Weight
11.5 lb (5.2 kg) without the ink cartridges
Electrical
Specification
120V Model
Input voltage range
103.5 to 132V
Rated frequency range
50 to 60 Hz
Input frequency range
49.5 to 60.5 Hz
Rated current
0.4A
Power consumption
Approx. 15W (ISO/IEC 10561 Letter Pattern)
Note:
Check the label on the back of the printer for the voltage
of your printer.
Environmental
Temperature
Operation: 50 to 95 °F (10 to 35 °C)
Storage:
stored in shipping container
1 month at 104 °F (40 °C)
120 hours at 60 °C (140 °F)
Humidity
Operation: 20 to 80% RH
Storage: 5 to 85% RH (stored in shipping
container, without condensation)
Safety Approvals
Safety standards
UL 1950 with D3, CSA C22.2 No.950
with D3
EMC
FCC part 15 subpart B class B,
CSA C108.8 class B
4 - EPSON Stylus COLOR 600
) paper
2
27.4 inches (695 mm) when
printing transparencies
7.7 inches (196 mm) when
printing transparencies
220 240V Model
198 to 264V
0.2A
4 to 140 °F (
20 to 60 °C),
–
–
Interface
Your printer is equipped with an 8-bit parallel interface and a
serial interface.
Parallel interface
The built-in parallel interface has the following characteristics:
Forward channel
Data format
8-bit parallel, IEEE-1284 compatibility
mode
Synchronization
STROBE
Handshake timing
BUSY
Signal level
TTL compatible
Connector
57-30360 Amphenol connector or
equivalent
Reverse channel
Transmission mode IEEE-1284 nibble mode
Adaptable
connector
57-30360 Amphenol connector or
equivalent
Synchronization
Refer to the IEEE-1284 specification
Handshaking
Refer to the IEEE-1284 specification
Signal level
IEEE-1284 Level 1 device
Data transmission
timing
Refer to the IEEE-1284 specification
Serial interface
The printer's built-in serial interface is based on the RS-423
standard. This interface has the following characteristics:
Standard
Based on RS-423
Synchronization
Synchronous
Bit rate
Approx. 900 Kbps
Handshaking
X-ON/X-OFF DTR protocol
Word format
Data bit: 8 bits
Parity bit: None
Start bit: 1 bit
Stop bit: 1 bit
Connector
8-pin mini-circular connector
Recommended
cable
Apple System Peripheral-8 cable
(Part number M0197)
1/97
pulse
and
signals
ACKNLG
Sayfayı Yazdır