CROW WORKS QUINCY 72 Montaj Talimatları - Sayfa 2

STEP 1

Place brackets on the floor center-to-center using

measurements below.

24"W Banquette: 18-1/2" (2 brackets)

30"W Banquette: 24-1/2" (2 brackets)

48"W Banquette: 42-1/2" (2 brackets)

60"W Banquette: 27-1/4" (3 brackets)

72"W Banquette: 33-1/4" (3 brackets)

STEP 2

See diagram to the right for spacing of the

back and seat boards.

STEP 3

Place boards on the brackets, with the 9-1/2" boards on the

back and the 7-1/2" boards on the seat, as shown in Step 2.

Secure the remaining boards on the brackets with screws

using the ¾" wide spacer to keep each board in the proper

location while attaching them.

Once all boards are placed on the bracket, screw each board

to the brackets using the holes in the metal bracket plates

using the proper torque setting for your drill.

STEP 4

See optional instructions if cushions were ordered for the

banquette or if banquette will be double-sided. If not,

ensure the banquette is in the correct position and secure

it to the floor using hardware suited to the floor substrate.

Secure to the floor through the holes in the foot plate. Each

foot plate needs at least one fastener.

Please note, Crow Works only provides hardware for the

assembly of the banquette and not to fix the product to the

floor. Please use an appropriate fastener for your application.

The foot plate is 1/4" thick and has (2X) 3/8" holes for

securing to the floor.

DESIGNED AND BUILT IN MIDDLE AMERICA

QUINCY BANQUETTE

ASSEMBLY INSTRUCTIONS

Start with bottom back board

All ideas, designs, planning, drawings, and specifications are owned by, and are the property of Crow Works, and were created and developed for use on, and in connection with the specified project. Under no condition is this drawing or any part of, to be reproduced, used by or disclosed to any person, firm, or corp. without the written consent of Crow

®

2X "A"

A

2X "B"

DESCRIPTION:

30" QUINCY BOOTH

FOOT PLATE

Questions? contact us at [email protected].

9-1/2"

A

3/4"

A

7-1/2"

3/4"

3/4"

B

B

REV.

DESCRIPTION

DATE:

DRAWN BY:

CHECKED BY:

DATE:

WEIGHT:

66.37 LBS

CROWWORKS.COM

1/2"

REVISIONS

PART NO:

QBH

REV:

SCAL

0