EPSON Stylus COLOR 800
3.
Press the
color cleaning button to print a list of current
settings and additional instructions.
4.
After you make the changes you want, turn the printer
off to save the settings. The settings remain in effect until
you change them again.
Printing from Windows
When you want to print from your Windows application,
you click the print icon or choose Print from the File menu.
You can then choose which pages to print, the number of
copies, and other options. The settings that describe your
print job—whether you want to use color or black ink, for
example—are part of your printer driver software.
Note:
If you're using Windows NT, you'll need special software for
your printer. Contact EPSON if you need printer driver
software for Windows NT.
Setting Printer Options from Windows Applications
Follow these steps to check printer settings from your word
processor or other Windows software:
1. Click the Print icon or choose Print or Print Setup from the
File menu. You see a printing dialog box.
2. Make sure your EPSON Stylus COLOR 800 printer is
selected, and then click the Printer, Setup, Properties, or
Options button. (You may have to click a combination of
these buttons.) You see a dialog box like the following:
Click to see
list of media
types.
6 - EPSON Stylus COLOR 800
3. Click the Main tab if necessary and make sure the Mode
option is set to Automatic. This is the easiest way to get
good printing results for all kinds of documents, on all
types of paper.
4. Choose the Media Type you want to print on.
The type of paper or other media you choose determines
the print quality or resolution you can use. See page 14 for
guidelines on choosing paper.
5. Choose Color or Black ink.
6. Set the slider to Quality or Speed. This lets you choose
between the fastest printing or the highest resolution for
the media you're using. (The slider is not available for
certain media types.)
7. If necessary, click the Paper tab and choose your paper
size, number of copies, and orientation. If your software
application lets you control these settings, you don't need
to use the Paper tab.
8. Click OK when you're finished checking your settings.
The dialog box closes.
If you're using Windows 95, you can click Apply and
keep the dialog box open.
9. In the printing dialog box, click Close, OK, or Print. You
may need to click a combination of these buttons.
Setting Windows Default Options
When you change printer settings through your software
application, the settings apply only to the application you're
using. If you want to adjust the default settings for all your
Windows applications, you can access the dialog box
through the Windows 95 Settings option or the Windows
3.1 Control Panel.
Make sure all your software applications are closed before
you start. If not, you'll have to close and then reopen them
to have the new default settings take effect.
Setting Default Options in Windows 95
Click for
Follow these steps:
more
1. Click Start, point to Settings, and then point to Printers.
information.
2. Right-click the EPSON Stylus COLOR 800 icon.
3. Select Properties. Then click the Main tab.
You see the Main printer settings dialog box. Any changes
you make will become the default settings for all your
applications and documents.
1/97
Note:
For printing at the highest resolution (SuperFine quality
at 1440 dpi), you need to use one of the photo quality
media. For the best printing at any resolution, always use
EPSON media.
Sayfayı Yazdır