3. To open the image file, click the Open Saved Work button. (In other programs, you click File in the
menu bar at the top of the screen, then select Open to open an image file.)
4. Click the arrow in the Look in list at the top of the Open window and select your CD-ROM drive. Then
double-click the Assets folder, click the car.psp file, and click Open. In a moment, the color image
appears in the PressWriter window.
5. Click File in the menu bar and select Print to select your printer settings. You see the Print dialog box
shown below.
6. Click Properties. (In some programs, you click Setup, then click Properties at the next screen.)
7. You see the printer settings dialog box. Change the following settings to print the sample color image:
1. Click the Main tab to
display the basic settings.
2. Then click the arrow in
the Media Type box and
select Photo Paper from
the list that appears.
(Whatever type of paper
you load, always make
sure the Media Type
option is set correctly for
your paper. See Chapter 2
of your User's Guide for
details.)
8. Click the OK button to close this dialog box and return to the Print dialog box.
9. Click OK again to start printing. A window may appear on your screen showing the progress of your
print job. This feature, called the Despooler or Progress Meter (depending on your operating system),
is described in Chapter 1 of your User's Guide .
In 7 to 10 minutes, the image is printed in full color on your printer.
EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
EPSON disclaims any and all rights in those marks. Copyright © 1998 by Epson America, Inc.
Printed on recycled paper with at least 10% post-consumer content.
Click here
3. If you want to print at
720 dpi, leave the
Quality/Speed slider at
the Speed setting.
Move it to the Quality
setting if you want to
print at 1440 dpi.
3/98