Epson Stylus Color C80 Kurulum Kılavuzu - Sayfa 3

Yazıcı Aksesuarları Epson Stylus Color C80 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Epson Stylus Color C80 6 sayfaları. Color ink jet printer
Ayrıca Epson Stylus Color C80 için: Şartname Sayfası (1 sayfalar), Talimatlar (2 sayfalar), Ürün Destek Bülteni (6 sayfalar), Ürün Destek Bülteni (1 sayfalar), Önce Bu Kılavuzu Okuyun (12 sayfalar), Yazılım Kurulum Kılavuzu (1 sayfalar), Tamamlayıcı Kılavuz (1 sayfalar), Kullanıcı Kılavuzu (27 sayfalar), Uyumluluk Kılavuzu (1 sayfalar), Kurulum Kılavuzu (1 sayfalar), Ürün Bilgileri (12 sayfalar), Buradan başlayın (2 sayfalar), Teknik Özellikler (2 sayfalar), Teknik Özellikler (2 sayfalar), Ürün Destek Bülteni (3 sayfalar), Ürün Destek Bülteni (2 sayfalar), Ürün Destek Bülteni (4 sayfalar), Ürün Destek Bülteni (4 sayfalar), Ürün Destek Bülteni (7 sayfalar), Kurulum (2 sayfalar)

Put this system on the right side of printer, tidy up ink flow tubes, pull out an air

balance plug and replace it with an air filter with the bigger side downwards.

3. Move out cartridge holder

Insert screwdriver like, screw screwdriver like until take cartridge cover off.

4. Install the system ink cartridges

Take cartridges out. Install CISS cartridges according to printer indication and

press cartridge down to the place.

5. Attach tubes

Tear sponge seal off. Tidy up ink tube. Stick rack onto the printer cover like.

Make sure that tube and rack will not fall off while printing. Do not twist ink tube.

6. Check wire length

Move cartridge holder to left side, then to right side, check if the tube is too long

or too short. Move cartridge holder to right side, check if ink tube will fall down during

movement, if fall down, then the holder will be blocked during printing. Generally,

before shipment, we have adjusted the tube to the right size, please double check before

printing.

7. Adjust wire length

If step 6 is ok, then there is no need to go through this step.

If the tube length is too short then lengthen it, if too long then shorten. If the tube falls

down, you need adjust the angle of sticker to prevent falling.

8. Take place meter off

Tidy up ink tube. Tear seal off, attach fixation like. Press ink tube while closing

printer cover to avoid deforming of ink tube.

9. Prepare for printing

Plug power wire on (3-9-1), turn printer on. Check whether printer and ink tube

can run normally. Close printer cover and check whether it is strange noise while

printing.

10. Check printer nozzle

INSTALLATION MANUAL ON CISS FOR PRINTER EPSON C82/C80/C70

Pic. 3-9-1