Dill 1504-572 Manuel - Sayfa 5

Otomobil Aksesuarları Dill 1504-572 için çevrimiçi göz atın veya pdf Manuel indirin. Dill 1504-572 12 sayfaları. Tpms trailer kit

1.5 Position of Transmitter and ID module

Note the default installation position of the transmitter and ID modules as illus-

trated. A letter identifier marked on the transmitter, id module, and hex nut is

shown on each component.

The letters "LF/RF/LR/RR" on the back of the display unit correspond to the

tires‟ respective positions. Each pair of transmitter and ID module need to be

installed in the same position.

To access the ID modules, pull the removable cover away from the display unit.

For example, if you install transmitter "A" in the left front tire, then you should

plug the ID module "A" in "LF" position on the receiver.

ID MODULE COVER

1101143

080908-1101134

Transmitter I.D.

I.D. Module

Hex Nut I.D.

If you purchased a 2 tire system for your trailer, verify that the installation of

your transmitter and ID modules are in their proper locations.

Note the matching of the transmitter and hex nut when mounting the ID

module. When a tire rotation or transmitter replacement occur, rotate or

replace the corresponding ID module simultaneously.

Refer to 3.7

Before installation into the rim hole, you must assemble the transmitter and

valve stem together.

2.1 Unscrew the hex nut and remove the metal washer from the valve stem.