Dill Retrofit TPMS Manuel - Sayfa 13

Kontrol Sistemleri Dill Retrofit TPMS için çevrimiçi göz atın veya pdf Manuel indirin. Dill Retrofit TPMS 16 sayfaları.

Sayfayı Yazdır

3.8 Changing Number Of Wheel Positions

The number of wheels in the vehicle can be set as 4, 6a, 6b, 8 or 10 as
not ed in Figure 13. Use the 4 position if monitoring a 2-wheel trailer ("Err"
or "NA" will display in the unused locations). The number of wheel position
is pre-set. However, if you add positions use the following procedure to
change it. To change the number of wheels, perform the following:
3.9.1 Press and hold the "SET" button for 5 seconds to enter the wheel
number configuration setting, a 'beep' will sound and the current wheel
configuration will appear on the screen.
3.9.2 Press the "R/D" button to select among 4, 6a-wheel, 6b-wheel, 8-wheel
or 10-wheel configuration. The position and the number of the wheels
will appear on the screen.
3.9.3 Press and hold the "SET" button for 5 seconds to complete the
selection. A 'beep' will sound when it's complete.
2 or 4 Wheels
A
(LF)
C
(L1)
6b Wheels
A
(LF)
C
D
(L1)
(R1)
E
(L2)
FIGURE 13
B
(RF)
D
(R1)
8 Wheels
B
A
(RF)
(LF)
C
(L1)
F
E
G
(R2)
(L2)
(L3)
6a Wheels
A
(LF)
C
(L1)
(L2)
B
(RF)
D
(R1)
H
F
(R3)
(R2)
12
B
(RF)
E
F
D
(R1)
(R2)
10 Wheels
A
(LF)
C
E
(L1)
(L2)
(R2)
G
J
(L3)
(L4)
(R4)
B
(RF)
F
D
(R1)
K
H
(R3)