AEMC instruments CA7027 Kullanıcı Kılavuzu - Sayfa 11
Ölçüm Cihazları AEMC instruments CA7027 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEMC instruments CA7027 20 sayfaları. Fault mapper pro graphical tdr
Ayrıca AEMC instruments CA7027 için: Kullanıcı Kılavuzu (20 sayfalar)
Sayfayı Yazdır
4.3
The instrument is switched on and off using the green power button
the lower right side of the front panel. When the unit is first switched on it
will display the opening screen giving the software version, the currently
selected Vp (Velocity of Propagation), cable impedance and battery status
indicator.
4.4
1. Hold down the
enter set-up mode.
2. The following options can be configured:
• TDR or Tone Generation
• Set Vp to % (1 to 99%) or speed in micro-seconds (see § 4.8)
• Set cable impedance (Z) to 25, 50, 75 or 100Ω Twisted pair (T/P)
• Set measurement units to Feet or Meters
• Adjust the display contrast
• Disable/Enable Auto-off function
3. Press the
screen.
4. Press the
5. Press
NOTE: When the Fault Mapper Pro
the current set-up parameters.
Fault Mapper Pro
Find Quality Products Online at:
Getting Started
Set-up Mode
TDR /
button, then press the
>
TDR
Vp % VC
Vp=67%
T/P 100Ω
Meters
Contrast
Shutdown : 1 Minute
TEST /
button to move the line selector (>) down the
and
buttons to change the setting of the line selected.
TDR /
again to save changes and exit set-up mode.
®
Model CA7027
GlobalTestSupply
www.
AEMC Instruments
Fault Mapper Pro
VX.X
®
is turned off, it will retain
on
TEST /
button to
.com
9