Acuity Controls ECLYPSE A1000 Kurulum Kılavuzu - Sayfa 8

Röleler Acuity Controls ECLYPSE A1000 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Acuity Controls ECLYPSE A1000 10 sayfaları. Asset tracking
Ayrıca Acuity Controls ECLYPSE A1000 için: Kurulum Kılavuzu (14 sayfalar)

Sayfayı Yazdır

Acuity Controls ECLYPSE A1000 Kurulum Kılavuzu

1. Power Supply Information

5.0 - Configuring the Controller

The controller's factory-default hostname is

eclypse-xxxxxx.local where xxxxxx is the last 6 characters

of the MAC address printed on a sticker located on the

side of the controller. See Figure 11.

For example, the sticker on the side of a controller

shows that its MAC address is 76:a5:04:cd:4a:d1.

Connect to the controller's Web interface as follows:

1. Open your Web browser.

2. In the Web browser's address bar, type

https://eclypse-cd4ad1.local

3. Login to the controller. Then set the controller's

parameters in the controller's configuration Web

interface. See Connecting to the Controller's

Configuration Web Interface.

5.2 Using the Controller's IP Address in a

Web Browser

Connect to a controller through its IP address as follows:

For a Wi-Fi Network Connection:

1. Open your Web browser.

2. In the Web browser's address bar, type

(the controller's factory-default wireless hotspot IP

address) and click go.

3. Login to the controller. Then set the controller's

parameters in the controller's configuration Web

interface. See Connecting to the Controller's

Configuration Web Interface.

For an Ethernet Network Connection: You must know

the controller's current IP address (from the DHCP server

for example).

1. Open your Web browser.

6.0 - Additional Information

6.1 Maintenance

Turn off power before any kind of servicing.

Regular Maintenance

Each controller requires minimal maintenance, but it is

important to take note of the following:

•

Clean the outside of the controller by polishing it

with a soft dry cloth.

•

Retighten terminal block connector screws annually

to ensure the wires remain securely attached.

and click go.

192.168.0.1

2. In the Web browser's address bar, enter the

controller's IP address and click go.

3. Login to the controller. Then set the controller's

parameters in the controller's configuration Web

interface. See Connecting to the Controller's

Configuration Web Interface.

5.3 Connecting to the Controller's

Configuration Web Interface

Figure 13: Web Interface Login

At the first connection to an ECLYPSE Controller you will

be forced to change the password to a strong password

for the admin account to protect access to the

controller.

In Network Settings, configure the controller's network

parameters so that they are compatible with your

network. It is important to create new user accounts with

strong passwords to protect the controller from

unauthorized access. Remove the factory default admin

account as this is a commonly known security breech

(only the password for this user account needs to be

compromized)

6.2 Disposal

The Waste Electrical and Electronic Equipment (WEEE)

Directive sets out regulations for the recycling and dis-

posal of products. The WEEE2002/96/EG Directive ap-

plies to standalone products, for example, products that

can function entirely on their own and are not a part of

another system or piece of equipment.

For this reason Acuity products are exempt from the

WEEE Directive. Nevertheless, Acuity products are

marked with the WEEE symbol , indicating devices are

not to be thrown away in muncipal waste.

Products must be disposed of at the end of their useful

life according to local regulations and the WEEE

Directive.

A1000AT_IG_10_EN

8 of 10