diLUSSO OV608SDS Kurulum ve Kullanım Kılavuzu - Sayfa 4
Fırın diLUSSO OV608SDS için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. diLUSSO OV608SDS 18 sayfaları. Side opening door built-in oven
Sayfayı Yazdır
Before connecting to the mains, make sure that:
The electric meter, safety valve, feeding line and socket are adequate to withstand the maximum load required
(refer to product data label for maximum load)
The supply system is regularly earthed, according to the regulations in force.
The isolation switch can easily be reached after the oven is installed.
After connection to the mains, check that the supply cable does not overheat.
Never use reductions, shunts, adaptors that can cause overheating or burning.
The supply cable must be positioned so that it does not exceed 50°C above room temperature at any point of its
length.
The manufacture shall not liable for any direct or indirect damage caused by faulty installation. The installer must
ensure that the product installation and connection complies with the local and general regulation in force.
Installation Instruction
Important!
Unplug the oven before performing installation or maintenance
Fit the appliance into its surround (beneath a work-top) by inserting screws into the 2 holes that can be seen in
the frame of the oven when the door is open.
Version 1.0
Page 3
May 2021