Epson Apex Ürün Destek Bülteni - Sayfa 39

Masaüstü Epson Apex için çevrimiçi göz atın veya pdf Ürün Destek Bülteni indirin. Epson Apex 45 sayfaları. Product support bulletin(s)
Ayrıca Epson Apex için: Ürün Bilgi Kılavuzu (3 sayfalar), Ürün Destek Bülteni (29 sayfalar), Ürün Destek Bülteni (21 sayfalar)

Epson Apex Ürün Destek Bülteni
EPSON
EPSON AMERICA INC.
SERVICE DEPARTMENT
PRODUCT SUPPORT BULLETIN
DATE:
3/9/88
SUBJECT: MS-DOS 3.2 FOR THE EQUITY I/II/III
The
purpose
of
availability
systems. Also
on hard drive systems currently using earlier revisions of MS-DOS.
The Equity I+ MS-DOS 3.2 package has
the
Equity
I,
available for customers who wish to upgrade their system.
It can be
ordered
This
package
documentation
The following is a simple procedure to perform the transfer of the
new MS-DOS 3.2 files to an existing hard disk system.
1. Insert the MS-DOS 3.2 diskette into drive A.
2.
If the system is powered up, press
system on.
A>
3. At the
will respond with the
4. At the A> prompt, type
This will replace the existing MS-DOS files with version 3.2
files.
5. At the A> prompt, type
ENTER.
This will copy new MS-DOS files to the subdirectory
indicated by
6. Remove the MS-DOS diskette and insert the GW-BASIC diskette
into drive A.
A>
7. At the
8. Repeat steps 4 and 5 above.
5 as A>, will now be C>.)
9. Remove the GW-BASIC diskette from the drive.
original diskettes in a safe place for storage.
this
bulletin
of
MS-DOS 3.2 for Equity I, Equity II and Equity III
included
are
Equity
II
Product Code Q390A-AA -
under
includes
for
the
Equity
prompt, type SYS C: and press
message, SYSTEM TRANSFERRED.
REPLACE A:\*.* C:\ /S and press ENTER.
REPLACE A:\*.* C:\[path] /A and press
[path].
prompt, type C: and press
provide
is
to
instructions
for
been
Equity III. This software is now
and
MS-DOS
3.2/GW-BASIC
I+.
RESET.
ENTER.
(Prompt,
listed in steps 4 and
NUMBER:
information
installing
MS-DOS
certified
for
$85.00
software
If not, turn the
ENTER.
The
system
Put the
Page 1 of 1
S-0014A
on the
3.2
use with
retail.
with