Motorola APX 6000 Hızlı Referans Kartı - Sayfa 2

İki Yönlü Telsiz Motorola APX 6000 için çevrimiçi göz atın veya pdf Hızlı Referans Kartı indirin. Motorola APX 6000 2 sayfaları. Digital portable radios
Ayrıca Motorola APX 6000 için: Kullanıcı Kılavuzu (45 sayfalar), Manuel (25 sayfalar), Hızlı Referans Kartı (2 sayfalar), Hızlı Referans Kartı (2 sayfalar)

Sayfayı Yazdır
Motorola APX 6000 Hızlı Referans Kartı
Sending an Emergency Call
1
Press the Emergency button.
2
Press and hold the PTT button. Speak clearly
into the microphone.
3
Release the PTT button to end call.
4
Press and hold Emergency button to exit
emergency.
To exit emergency at any time, press and hold
the Emergency button.
Sending a Silent Emergency Call
1
Press the Emergency button.
2
The display does not change; the LED does
not light up, and there is no tone.
3
Silent emergency continues until you:
Press and hold the Emergency button to exit
emergency state.
OR
Press and release the PTT button to exit the
Silent Emergency Alarm mode and enter
regular dispatch or Emergency Call mode.
To exit emergency at any time, press and hold
the Emergency button.
Display Status Icons
u
Receiving a call or data
t
Transmitting a call or data
English
8
Blinks when the battery is low.
The more stripes, the stronger the
V
signal strength for the current site
(trunking only).
Direct radio to radio communication or
O
connected through a repeater.
On = Direct
Off = Repeater
M
This channel is being monitored.
H
.
L = Radio is set at Low power.
OR
H = Radio is set at High power.
i
Scanning a scan list.
Blinking dot = Detects activity on the
Priority-One Channel
j
during scan.
Steady dot = Detects activity on the
Priority-Two Channel
during scan.
k
The vote scan feature is enabled.
Menu Navigation
< or > to Menu Entry.
{
|
}
,
, or
directly below Menu
Entry to select.
H to exit.
On = Secure operation.
m
Off = Clear operation.
Blinking = Receiving an encrypted
voice call.
On = AES Secure operation.
l
Off = Clear operation.
Blinking = Receiving an encrypted
voice call.
G
On = GPS enabled, and location signal
available.
Off = GPS disabled.
Blinking = GPS enabled, but location
signal unavailable.
On = User is currently associated with
n
the radio.
Off = User is currently not associated
with the radio.
Blinking = Device registration or user
registration with the server
failed due to an invalid
username or pin.
o
Data activity is present.
b
Bluetooth is ready.
a
Bluetooth is connected to the device.
U or D to scroll through sub-list.
{
|
}
,
, or
directly below Menu
Entry to select.