Motorola APX N30 Hızlı Başlangıç Kılavuzu - Sayfa 4

İki Yönlü Telsiz Motorola APX N30 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Motorola APX N30 8 sayfaları.

Sayfayı Yazdır

English

3 Digital Mic 2

4 Display

5 Home button

6 4-Way Navigation buttons

7 Programmable button 1 (P1)

8 Speaker

9 Programmable button 2 (P2)

10Notification button

11Menu Select buttons

12Accessory Connector

13Top (Orange) button

Turning the Radio On or Off

Ensure that the battery is fully charged before the first use.

Turning the Radio On

Turn the On/Off/Volume Control knob clockwise until it clicks.

Turning the Radio Off

Turn the On/Off/Volume Control knob counterclockwise until it

clicks.

Selecting Zones and Channels

Rotate the Channel Selector knob to the desired Channel.

Accessing Radio Call Activities

Perform one of the following actions:

• To call, press and hold the PTT button.

• To listen, release the PTT button.

• To adjust volume, turn the On/Off/Volume Control knob.

• To monitor, press the programmed Monitor button and listen.

Sending an Emergency Alarm

1 Press and hold the Top (Orange) button.

16 Digital Mic 1

17 Belt Clip Bracket

18 Battery

19 Charging Contacts

20 2-Dot Programmable button

21 1-Dot Programmable button

22 Push-to-Talk (PTT) button

23 3-Dot Programmable button

24 Antenna

Your radio shows the following indications:

• A tone sounds.

• The red LED illuminates.

• The display shows Top (Orange) and the current zone/channel.

• When acknowledgment is received, you hear four beep tones;

alarm ends; and radio exits emergency

2 Press and hold the Top (Orange) button to exit emergency.

Sending an Emergency Call

1 Press the Top (Orange) button.

2 Press and hold the PTT button to speak.

3 Release the PTT button to end call.

4 Press and hold Top (Orange) button to exit emergency.

Sending a Silent Emergency Call

1 Press the Top (Orange) button.

2 Silent emergency continues until you perform one of the following:

• Press and hold the Top (Orange) button to exit emergency state.

• Press and release the PTT button to exit the Silent Emergency

Alarm mode and enter regular dispatch or Emergency Call mode.

Status Icons

Battery Level

Received Signal Strength Indicator (RSSI)

RSSI Receiving