Motorola CLP107e Kullanıcı Kılavuzu - Sayfa 25

İki Yönlü Telsiz Motorola CLP107e için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola CLP107e 42 sayfaları.

4 Insert the battery into the charging pocket with the inside surface of the battery facing the front of

the charger.

5 Ensure that the slots in the battery are correctly engaged in the charger.

3.5.3

Estimated Charging Time

The following tables provide the estimated charging time of the battery.

Table 5: Estimated Charging Time

Charging Solution

Single Unit Charger

Multi-Unit Charger

3.6

Procedure:

1 Place the drop-in Tray Single Unit Charger (SUC) on a flat surface.

2 Insert the connector of the power supply into the Micro USB port on the front of the drop-in tray

charger.

3 Connect the correct power supply to a proper AC outlet.

4 Insert the radio with battery installed into the tray, facing down and making sure that the

charging contacts on the charger are aligned with the contacts on the radio.

Figure 8: Charging Radio

NOTICE: When charging a battery attached to radio, ensure that the radio is turned off.

You can enable or disable the radio to automatically turn off when radio is inserted into

the charger feature through Customer Programming Software (CPS).

Chapter 3: Battery and Charger

Standard Li-Ion Battery

5.5 hours

4 hours

MN007419A01-AA