Motorola clp446 Kullanıcı Kılavuzu - Sayfa 35

İki Yönlü Telsiz Motorola clp446 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola clp446 46 sayfaları. Clp series two-way radio
Ayrıca Motorola clp446 için: Kullanıcı Talimatları (9 sayfalar), Hızlı Referans (35 sayfalar)

Sayfayı Yazdır

Symptom

Limited talk range

Message not transmitted/

received

Steel and/or concrete structures, heavy foliage, buildings

or vehicles decrease range. Check for clear line of sight to

improve transmission.

Change location of radio. To increase range and coverage,

you can either reduce obstructions or increase power.

UHF radios provide greater coverage in industrial and

commercial buildings.

Increasing power provides greater signal range and increased

penetration through obstructions.

Make sure the PTT button is completely pressed when

transmitting.

Confirm that the radios have the same Channel, Frequency,

Interference Eliminator Code and Scramble Code settings.

Refer to "Transmitting and Receiving" Section on page 7.

Recharge, replace and/or reposition batteries. Refer to "About

the Li-Ion Battery" Section on page 12.

Obstructions and operating indoors or in vehicles, may

interfere. Change location.

Verify that the radio is not in Scan mode. Refer to "Scanning"

Section on page 10.

Try this

English