Motorola CLS1410 Kullanıcı Kılavuzu - Sayfa 13

İki Yönlü Telsiz Motorola CLS1410 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola CLS1410 30 sayfaları. Cls series two-way radio
Ayrıca Motorola CLS1410 için: Kullanıcı Kılavuzu (17 sayfalar)

Sayfayı Yazdır

6. To transmit, speak into the accessory microphone. To receive, stop talking.

To disable VOX operation, press Push to Talk or remove the audio accessory.

Note: To order accessories, visit www.motorola.com/radios/professional,

call 1-800-448-6686, or contact your point of purchase.

Setting the VOX Sensitivity

You can adjust the sensitivity of your radio's accessory or microphone during VOX

operation to suit different operating environments. These menus appear only when

the VOX feature is in use, which is indicated by g.

1. Press

until g displays. The radio displays H when you are

setting the external VOX (with audio accessory).

2. Press [ or ] to select the sensitivity level:

0 = Off

1 = Low

Locking the Keypad

You can lock the keypad to avoid accidentally changing your radio settings.

1. Press and hold

2. To unlock, press and hold

Monitoring a Channel

Monitoring allows you to check for activity on a channel.

1. Press and hold

static and w and 0 will display.

2. Press

again to stop monitoring.

Scanning (CLS1410 Only)

You can scan up to 4 channels and frequencies. When the radio

detects activity, it stops scanning and locks in on the active channel. This allows you

to talk and listen to the person transmitting without changing channels.

1. To start scanning, briefly press

The scan icon h displays and the radio begins to scan the channels. When the

radio detects activity, it stops on that channel and displays w and the channel

number.

2. To talk to the person transmitting without switching channels, press Push to Talk

within 5 seconds. If no transmission occurs within 5 seconds, scanning resumes.

3. To stop scanning, briefly press

If you press Push to Talk while the radio is scanning, the radio transmits on the

channel you were on before you started scanning.

2 = Medium

for 3 seconds.

. If the channel is clear to use, you will hear

3 = High

External VOX

020995o