Motorola CP200 Kullanıcı Kılavuzu - Sayfa 33

İki Yönlü Telsiz Motorola CP200 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola CP200 44 sayfaları. Portable series
Ayrıca Motorola CP200 için: Kullanıcı Kılavuzu (44 sayfalar), Teknik Özellikler (2 sayfalar)

Sayfayı Yazdır

SCAN

Your radio is equipped with the Scan feature,

which allows you to monitor multiple channels

for voice activity. The radio will stop on a

channel when it detects activity on it.

Your radio automatically switches to a channel

within the scan list when it detects activity.

The LED indicator blinks green during a scan

operation and stops blinking when the radio

switches to a channel.

There are two types of Scan available in your

radio:

• System Scan

• Auto Scan

TALKBACK

The Talkback feature allows you to respond to

a transmission while scanning. If a

transmission is detected on a channel while

scanning, the radio will stop on that channel for

a default period of time after activity has

ceased. This is referred to as "hangtime".

During this hangtime you may respond by

pressing the PTT button.

Note: The LED scan indicator stops blinking

while the radio is in hangtime. If the

PTT button is not pressed during the

preprogrammed hangtime, the radio

returns to scanning channels.

STARTING SYSTEM SCAN

Press the preprogrammed Scan button (see

page 14).

STOPPING SYSTEM SCAN

Press the preprogrammed Scan button.

STARTING AUTO SCAN

Auto Scan automatically starts scanning once

a channel with Auto Scan enabled is selected.

Select the channel that your dealer has

preprogrammed for Auto Scan.

STOPPING AUTO SCAN

Select a channel that has not been

preprogrammed for Auto Scan.

English