Motorola GTX Kullanıcı Kılavuzu - Sayfa 15

İki Yönlü Telsiz Motorola GTX için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola GTX 36 sayfaları. 900mhz two way mobile radio
Ayrıca Motorola GTX için: Kullanıcı Kılavuzu (49 sayfalar), Servis Kılavuzu (30 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kullanıcı Kılavuzu (25 sayfalar)

Sayfayı Yazdır

Transmitting on a Conventional Channel

1. Turn on the radio and select the desired conventional channel.

2. If the conventional channel on which you are transmitting is

programmed to receive PL (Private Line) or DPL (Digital Pri-

vate Line), ensure that the channel is not in use by listening for

activity. You can do this by monitoring a channel. Refer to the

Monitoring instructions on page 14.

•

The YELLOW indicator LED will light if the channel is in use.

Do not transmit if someone else is using the channel.

3. If Smart PTT is enabled, you do not need to listen for channel

activity before transmitting. Any attempt to transmit on a busy

channel will cause an invalid-mode tone to sound until the PTT

button is released.

4. When the channel is available, hold the microphone in a verti-

cal position at a distance of about 1 to 2 inches (2.5 to 5 cm)

from your mouth.

5. Press and hold the PTT button and speak slowly and clearly

into the microphone.

•

The RED Transmit LED will light continuously while the radio

is transmitting.

6. When your transmission is complete, release the PTT to listen.

Basic Radio Operation