Motorola M-Series Kullanıcı El Kitabı - Sayfa 14

İki Yönlü Telsiz Motorola M-Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Motorola M-Series 24 sayfaları. Professional two-way radio
Ayrıca Motorola M-Series için: Kullanıcı Kılavuzu (34 sayfalar)

Sayfayı Yazdır

OPERATIONS

Turn the Radio On/Off

Turn the On-Off/Volume knob clockwise. You

will hear a beep and see the Transmit Light

ﬂash momentarily to indicate the radio is on.

To turn the radio off, turn the On-Off/Volume

knob counterclockwise. You will hear a click

to indicate the radio is turned off.

Adjust the Volume

Hold Monitor button down to listen to audio

level while rotating On-Off/Volume knob.

Rotate knob clockwise to increase and coun-

terclockwise to decrease volume.

To Send/Receive Messages

Check channel activity by pressing Monitor

button. You will hear static if the channel is

clear to use. Do not transmit if someone is

talking on channel.

1. To send messages, press Push-To-Talk and

speak into radio. (To maximize clarity, hold

radio 1 to 2 inches from mouth). Fig. M

2. The Transmit Light will glow continuously

when sending messages.

3. To listen for messages, release the Push-To-

Talk button.

FIG. M

See page 15 for range information.

Time-out Timer:

The Time-out Timer feature prevents channel

congestion and helps extend battery life. The

radio will sound a warning tone if the Push-

To-Talk button is pressed for 60 continuous

seconds and will stop transmitting.

Scan (Optional)

Some M-Series models have Scan. Scan

allows you to monitor the radio's pro-

grammed channels and code. When the

radio detects someone talking, it stops

scanning and locks in on the active chan-

nel. It allows you to listen and talk back

automatically to the person transmitting

without having to switch channels.

Note: To communicate in scan, your radio

must be set to the same frequency and

code as the other radio(s) in your group.

To Use Scan Feature

1. Move the Channel Selector knob to the

"s" position (Fig. N). The radio will scan

the radio's programmed channels and

code in sequential order.

2. When the radio detects someone talking,

you will hear the message.

3. Press Push-To-Talk button to talk back on

the channel.

In scan, you will always transmit back to

the channel which last sent a message.

4 Channel Model

FIG. N

Notes:

• In scan, after you receive a message, the

radio will remain on that channel for three

seconds before returning to scan mode.

• If you set the Channel Selector knob to

the "s" position (scan mode) and no activ-

ity is detected, you will transmit on chan-

nel 1 when you press the Push-To-Talk