Motorola MT350PR Kullanıcı Kılavuzu - Sayfa 2

İki Yönlü Telsiz Motorola MT350PR için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola MT350PR 4 sayfaları. Mt series

Sayfayı Yazdır

Transmitting a Talk Confirmation Tone

Hands-Free Use Without Accessories (

)

You can set your radio to transmit a unique tone when you finish

You can use the iVOX feature to transmit hands-free without the need for

transmitting. It is like saying "Roger" or "Over" to let others know you

any headset accessories. Once iVOX is turned on, the radio detects your

are finished talking.

voice and transmits when you speak into the internal microphone.

1. With the radio on, press

1. Press

until

appears on the display. The current setting

On/Off flashes.

On/Off will flash.

2. Press

to select On or Off.

3. Press

to set or

to continue set up.

Dual Watch Scan

Hands-Free Use With Accessories (

)

This feature allows you to monitor two channels at the same time.

You can transmit hands-free more reliably with the use of optional

1. Press the

headset accessories. Once VOX is turned on, the radio detects your

2. Press the

voice and transmits when you speak.

Watch reception. (if you want to disable the Dual Watch function, set

Many accessories (sold separately) are available for your radio. For

it to 'OFF').

more information, visit our Web site at motorolasolutions.com/talkabout

3. Press

or shop.giantintl.com.

When the Dual Watch feature is activated, the radio will switch

1. Turn the radio off and plug the VOX accessory into the accessory port.

sequentially between the primary and the Dual Watch channels.

2. Turn the radio on. VOX shows on the display.

The active channel will display for five (5) seconds after any activity has

djust the volume appropriately by rotating

. Lower the volume

ended on the dual channel. You may talk on the Dual Watch channel

before placing the accessory on your head or in your ear.

during this period.

4. To turn off, simply remove accessory.

Note: There is a short delay between the time you start talking and

when the radio transmits. There is a short delay before the transmission

Emergency Alert Mode

is completed.

The Emergency lert feature can be used to signal members in your

group of your need for urgent help. MT series radios will operate in an

Setting the Sensitivity Level When in

Mode

automatic "hands-free" emergency control mode for a total of 30

djusting the radio's sensitivity level helps minimize the possibility of

seconds after activating the Emergency lert. MT series radios in your

unintended noises triggering a transmission and helps the radio pick up

group will automatically advance the speaker volume to the maximum

soft voices.

setting and sound a warbling alert tone for 8 seconds. The alert tone is

emitted from your own radio speaker and the receiving radios in your

1. Press

until VOX and the level setting (1 - 3) appear on the

group. fter the 8 second alert, any spoken words or incidental sounds at

display.

your end will be transmitted to the group for 22 seconds. For the 30

2. Press

to select the sensitivity level.

second duration of Emergency lert mode, MT series radio controls and

buttons will be locked to maximize reception of the emergency message.

3. Press

to set or

to continue set up.

1. Press and hold the Emergency lert button for 3 seconds.

3 = High Sensitivity for quiet environments

2. Release the button after the LED Indicator glows red and the alert tone

2 = Medium Sensitivity for most environments

begins to sound. There is no need to continue to hold the Emergency

1 = Low Sensitivity for noisy environments

lert button or use PTT for your message to be transmitted.

fter the alert tone ends you may speak into the microphone. Your

Note: When you connect a headset, the radio is automatically set to the

voice or incidental sounds will be transmitted. The LED indicator will

last chosen sensitivity level.

continue to glow for the duration of the 22 second period.

Noise Filtering

fter 30 seconds your radio speaker will emit a Talk Confirmation

The Q

noise-filtering feature helps to ensure uninterrupted

Tone and the LED Indicator will extinguish. Operation then returns to

communication with other Motorola radios that have this feature.

normal two-way mode.

This feature also filters out unwanted transmissions from other

Note:

ll Motorola Talkabout EM, MJ, MR, and MT series radios are fully

radios. This is useful in places where there is heavy radio traffic,

compatible with the Emergency lert feature. Radios other than EM, MJ,

such as amusement parks or ski resorts.

MR, and MT series can receive the emergency alert signal, but will not

Note: Q

respond with adjusted volume settings, locked controls, or a warbling

noise filtering is not available when the radio is scanning.

alert tone. Users of other radio models set to the same channel and

To turn Q

noise filtering on or off:

Interference Eliminator Code will hear a steady tone for 8 seconds

followed by the voice transmission for 22 seconds.

1. Press

until

displays. The current setting On/Off will flash.

Warning: The Emergency lert feature should only be used in the event

2. Press

to turn noise filtering On or Off.

of an actual emergency. Motorola is not responsible if there is no

3. Press

to confirm your selection or

to continue set up.

response to the emergency alert from the receiving group.

Built-in Flashlight

To transmit to a radio that has Q

noise filtering turned on:

1. Select the same channel and Interference Eliminator Code as

Press and hold the flashlight button to turn and keep the light on. The

the other radio.

switch functions as a momentary control for the light.

2. Press

to send a call tone. This allows your voice to pass

Note: Turn off the flashlight when not in use to conserve battery power.

through the Q

noise filter on the receiving radio.

Keypad Lock

3. Press

and speak normally.

To avoid accidentally changing your radio settings:

Note: If you skip step 2, the beginning of your message may not be

1. Press and hold

heard on the receiving radio. For a 30-second period, starting after

2. When in lock mode, you can turn the radio on and off, adjust the

the last transmission, all transmissions received on the selected

volume, receive, transmit, send a call tone, and monitor channels. ll

channel and code will pass through the Q

noise filter.

other functions are locked.

VibraCall

Alert

To unlock the radio, press and hold

VibraCall

is a vibrating alert that notifies you that your radio is

receiving a message. This is useful in noisy environments. When the

Scanning Channels

alert is on, the radio vibrates once every 30 seconds when you receive a

Use scan to search the 14 channels for transmissions from unknown

message on the channel and code you set.

parties, to find someone in your group who has accidentally changed

channels, or to quickly find unused channels for your own use.

1. To turn vibrating alerts on, press

until

is displayed. The

There is a priority feature and 2 modes of scanning ( basic and

current setting will flash.

advanced ) to make your search more effective. The basic scan mode

uses the channel and code combinations for each of the 14 channels as

2. Press

to change the setting to On/Off.

you have set them ( or with the default code value of 1). The " dvanced

3. Press

to set or

to continue set up.

Scan" mode will scan all channels for any and all codes, detect any

code in use, and use that code value temporarily for that channel.

Keypad Tones

Priority is given to the "home channel," that is, the channel (and

You may enable or disable the speaker key tones. You will hear the key

Interference Eliminator Code) your radio is set to when you start the scan.

tone each time a button is pushed.

This means the initial channel (and code setting) is scanned more often

1. Press

until

appears. The current setting On/Off will flash.

than the other 13 channels, and your radio will respond quickly to any

activity occurring on the home channel as a priority.

2. Press either

to turn On or Off.

To start Scanning:

3. Press

to confirm or

to continue set up.

1. Briefly press the

Note: When the key tone feature is off, the following are not disabled:

radio will begin to scroll through the channel and code combinations.

•

Transmit timeout alert tone

2. When the radio detects channel activity matching the channel and

•

Call tone

code combination, it stops scrolling and you can hear the

•

Low battery alert tone or

transmission.

•

The transmitted talk confirmation tone

3. To respond and talk to the person transmitting, press

seconds after the end of the transmission.

4. The radio will resume scrolling through the channels five seconds

after the end of any received activity.

5. To stop scanning, briefly press the

To start Advanced Scanning:

until the

appears. The current setting

1. Set the Interference Eliminator Code to "zero" or OFF.

2. Briefly press the

to turn On or Off.

the radio will begin to scroll through the channels. No Interference

Eliminator Codes will filter what is heard.

to set or

to quit menu mode.

3. When the radio detects channel activity with NY code (or NO

code), it stops scrolling and you can hear the transmission. ny

Interference Eliminator Code that may be in use by that party will be

button until the Dual Channel Scan icon

displays.

detected and displayed.

buttons to select the second channel for Dual

4. To respond and talk to the person transmitting, press

seconds of the end of the transmission. The radio will transmit using

the newly detected Interference Eliminator Code.

or the PTT button to confirm the channel selection.

5. The radio will resume scrolling through the channels five seconds

after the end of any received activity.

6. To stop scanning, briefly press the

Scanning Notes:

1. If you press

while the radio is scrolling through inactive

channels, the transmission will be on the "home channel". Scanning

will resume five seconds after the end of your transmission. You may

Special Features

press the

key to stop scanning at any time.

2. If the radio stops on an undesired transmission, you may immediately

resume the scan by briefly pressing

3. If the radio repeatedly stops on an undesired transmission, you may

temporarily remove that channel from the scan list by pressing and

holding

for three seconds. You may remove more than one

channel in this way.

4. To restore the removed channel(s) to the scan list, turn the radio off

and then back on, or exit and re-enter the scanning mode by

pressing

5. You cannot remove the home channel from the scan list.

6. In dvanced Scan, the detected code will only be used for one

transmission. You must note the code, exit scan, and set that

detected code on that channel to permanently use the detected code.

until

displays.

until

is no longer displayed.

key. The scan

will appear in the display, and the

within five

key.

key. The scan

will appear in the display, and

within five

key.

What Other Limitations Are There?

Warranty

NY IMPLIED W RR NTIES, INCLUDING WITHOUT LIMIT TION

THE IMPLIED W RR NTIES OF MERCH NT BILITY ND FITNESS

Consumer Two-Way Radio Products and Accessories purchased in

Peru.

FOR

P RTICUL R PURPOSE, SH LL BE LIMITED TO THE

DUR TION OF THIS LIMITED W RR NTY, OTHERWISE THE REP IR,

What Does this Warranty Cover?

REPL CEMENT, OR REFUND S PROVIDED UNDER THIS EXPRESS

Subject to the exclusions contained to the right, Giant International

LIMITED W RR NTY IS THE EXCLUSIVE REMEDY OF THE

Ltd. warrants the Motorola branded consumer two-way radios that

CONSUMER, ND IS PROVIDED IN LIEU OF LL OTHER

operate via Colectivo Familiar that it manufactures ("Products"), the

W RR NTIES, EXPRESS OR IMPLIED. IN NO EVENT SH LL

Motorola branded or certified accessories sold for use with these

MOTOROL SOLUTIONS, INC. OR GI NT INTERN TION L LTD. BE

Products that it manufactures (" ccessories") to be free from

LI BLE, WHETHER IN CONTR CT OR TORT (INCLUDING

defects in materials and workmanship under normal consumer

NEGLIGENCE) FOR D M GES IN EXCESS OF THE PURCH SE PRICE

usage for the period(s) outlined below. This limited warranty is a

OF THE PRODUCT OR CCESSORY, OR FOR NY INDIRECT,

consumer's exclusive remedy, and applies as follows to new

INCIDENT L, SPECI L OR CONSEQUENTI L D M GES OF NY

Motorola branded Products and ccessories manufactured by

KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS,

Giant International Ltd., and purchased by consumers in in the

LOSS OF INFORM TION OR OTHER FIN NCI L LOSS RISING OUT

countries mentioned above, which are accompanied by this written

OF OR IN CONNECTION WITH THE BILITY OR IN BILITY TO USE

warranty:

THE PRODUCTS OR CCESSORIES TO THE FULL EXTENT THESE

Who is covered?

D M GES M Y BE DISCL IMED BY L W.

This warranty extends only to the first consumer purchaser, and is

Some states and jurisdictions do not allow the limitation or

not transferable.

exclusion of incidental or consequential damages, or limitation on

the length of an implied warranty, so the above limitations or

What will GIANT INTERNATIONAL LTD. do?

exclusions may not apply to you. This warranty gives you specific

GI NT INTERN TION L LTD., at its option, will at no charge repair,

legal rights, and you may also have other rights that vary from state

replace or refund the purchase price of any Products or

to state or from one jurisdiction to another.

ccessories that does not conform to this warranty. We may use

functionally equivalent reconditioned/ refurbished/ pre-owned or

new Products, ccessories or parts.

Products Covered

Length of Coverage

Products and Accessories as

One ( 1) year from the date of

Normal Wear and Tear. Periodic maintenance, repair and

defined above, unless

purchase by the first consumer

replacement of parts due to normal wear and tear are excluded

otherwise provided for below.

purchaser of the product unless

from coverage.

otherwise provided for below.

Batteries. Only batteries whose fully charged capacity falls below

1. Consumer Two-Way Radio

1. Ninety ( 90) days from the

80% of their rated capacity and batteries that leak are covered by

Accessories.

date of purchase by the first

this limited warranty.

consumer purchaser of the

Abuse & Misuse. Defects or damage that result from: (a) improper

product.

operation, storage, misuse or abuse, accident or neglect, such as

2. Products and Accessories

2. The balance of the original

physical damage (cracks, scratches, etc.) to the surface of the product

that are Repaired or

warranty or for ninety ( 90)

resulting from misuse; (b) contact with liquid, water, rain, extreme

Replaced.

days from the date returned

humidity, heavy perspiration, when the battery door or accessory port

to the consumer, whichever

seals are not closed, sand, dirt or the like, extreme heat, or food; (c)

is longer.

use of the Products or ccessories for commercial purposes or

subjecting the Product or ccessory to abnormal usage or conditions;

or (d) other acts which are not the fault of Motorola Solutions, Inc. or

Giant International Ltd., are excluded from coverage.

Use of Non-Motorola branded Products and Accessories. Defects

or damage that result from the use of Non-Motorola branded or

certified Products or ccessories or other peripheral equipment

are excluded from coverage.

Unauthorized Service or Modification. Defects or damages

resulting from service, testing, adjustment, installation,

maintenance, alteration, or modification in any way by someone

other than Motorola Solutions, Inc, Giant International Ltd. or its

authorized service centers, are excluded from coverage.

Altered Products. Products or ccessories with (a) serial numbers

or date tags that have been removed, altered or obliterated; (b)

broken seals or that show evidence of tampering; (c) mismatched

board serial numbers; or (d) nonconforming or non-Motorola

branded housings, or parts, are excluded from coverage.

Communication Services. Defects, damages, or the failure of

Products or ccessories due to any communication service or

signal you may subscribe to or use with the Products or

ccessories is excluded from coverage.

How to Obtain Warranty Service or Other Information?

For Accessories, please call the telephone number designated

To obtain service or information, please call:

above for the product with which they are used.

You will receive instructions on how to ship the Products or

Peru Two-Way Radios

ccessories at your expense, to a GI NT INTERN TION L LTD.

uthorized Repair Center. To obtain service, you must include: (a) a

0-800-52-470

copy of your receipt, bill of sale or other comparable proof of

purchase; (b) a written description of the problem; (c) the name of

your service provider, if applicable; (d) the name and location of the

installation facility (if applicable) and, most importantly; (e) your

address and telephone number.

Patent and Copyright Information

Manufactured, distributed or sold by Giant International Ltd., official

licensee for this product. MOTOROL , MOTOROL SOLUTIONS and

the Stylized M Logo are trademarks or registered trademarks of

Motorola Trademark Holdings, LLC and are used under license. ll

other trademarks are the property of their respective owners.

Exclusions

MT Series