Epson Equity 386/33 PLUS Ürün Bilgi Kılavuzu - Sayfa 5
Masaüstü Epson Equity 386/33 PLUS için çevrimiçi göz atın veya pdf Ürün Bilgi Kılavuzu indirin. Epson Equity 386/33 PLUS 6 sayfaları. Product information guide
Ayrıca Epson Equity 386/33 PLUS için: Ürün Destek Bülteni (13 sayfalar)
Sayfayı Yazdır
Hard Disk Drive Types
T
The following table lists the types of hard disk drives supported
by the computer. Check this table and the documentation
supplied with the hard disk to find the correct number for the
type of hard disk drive(s) installed. Enter this number when
setting the hard disk drive configuration in the SETUP
program
Hard disk
drive types
drive types
17
512
6
17
462
6
256
6
733
17
1622
5
1622
5
36
43
17
I PI
1624
6
17
512
4
6
17
-
-
Equity Series Computers
26
511
733
26
6-r-4036
1622
65
m m
1622
612
1623
63
1622
43
126
-
-
-
Installation/Support Tips
Mouse and Keyboard
When attaching the mouse and keyboard connectors, be
they are physically identical, they are not interchangeable.
Installing Floppy Disk Drives
When installing a floppy disk drive as drive B, remember
to set the drive select lumper
attach the pass-through connector on the floppy drive
controller cable to the drive, not to the end connector.
If the drive does
drive type has been correctly selected in SETUP. Also
check that any special drivers that may be necessary have
been installed correctly.
Installing Hard Disk Drives
controller be used in the Equity 386/33 Plus if you are
installing a drive that cannot use the internal IDE interface
Also mmember to disable the onboard hard disk controller
in SETUP when installing such a drive.
If you are havingditficulty in formatting the hard disk
drive, try starting over with the Format option in
diagnostics.
Setup
When installing a hard disk drive, be sure to consult the
drive type tables for the type which fits the drive you are
installing. If there is no match for your drive, use the User
Defined option and enter the correct geometry for your
drive.
Adding Memory Modules
The total amount of memory must be one of the following
Use only 4MB SIMMs. They must be fast-page mode and
have an access speed of 801~ or faster.
Software Problems
When installing a copy-protected software package on the
Equity 386/33 PLUS, first try the installation at 33 MI-Ir. If
this does not work properly, try switching to 11 MHZ for
the installaHon If you are sHll unable to load the program
at 33 MHZ, try k>ading at 11 MHz and then switching to
When using a software package that uses a keydisk as its
copy-protection method, try loading it at 33 MHz. If this
does not work, enable the Auto Speed option in SETUP.
Power-on Password
I
If you set a
forget it. If you do, it will be necessary to disable it by
A position
EQUITY 386/33 PLUS
the second position and
to
not function normally, make sure that the
or
password,
make sure you do not
386/33 PLUS-5