Motorola TWO WAY RADIO Manuel - Sayfa 10

İki Yönlü Telsiz Motorola TWO WAY RADIO için çevrimiçi göz atın veya pdf Manuel indirin. Motorola TWO WAY RADIO 17 sayfaları. Handie-talkie fm two-way radio 1& 3.5 rf power 136-174 mc portable transistorized
Ayrıca Motorola TWO WAY RADIO için: Manuel (49 sayfalar)

Sayfayı Yazdır

To set another channel and code combination, repeat

these steps.

Time-out Timer

The Time-out Timer feature helps extend battery life by

preventing you from accidentally transmitting. The radio will

emit a continuous warning tone after Mis pressed for 60

continuous seconds and will stop transmitting.

Keypad Lock

The keypad lock disables the \, ]and [buttons. It allows

you to use the Q, M and ^ buttons.

Press and hold the \ button for three seconds to lock or unlock

the keypad. When the radio is locked f will show in the display.

Hands Free Use (VOX)

VOX allows you to transmit "hands free" by

talking while using VOX accessories

connected to the radio.

Note: When using audio accessories with

your radio, turn the volume of your radio down before you

place the accessory on your head or in your ear.

How To Use The VOX Feature

• Switch off your radio.

• Open the accessory cover and insert the audio accessory

into the accessory jack.

• Switch on your radio. The g icon will appear in the display

to indicate that the VOX feature is active.

• To transmit, speak into the accessory microphone. To receive,

stop talking.

• Pressing M or removing audio accessory will disable VOX

operation.

Note: There is a short delay after you start talking, before the

radio transmits.

Setting Sensitivity Levels

Adjusting your radio's VOX and/or microphone sensitivity level

helps to minimize the possibility of unintended noises

triggering a transmission, or enhances the ability to pick up

quiet voices.

If an accessory is fitted to your radio these instructions will

help you to adjust the VOX sensitivity and if no accessory is

fitted you will adjust the Microphone sensitivity.

• Press \ until g and a flashing number appear in the display.

• Select sensitivity level of 1, 2 or 3 by using ]or [.

1 - If you speak loudly, or are in a noisy environment.

2 - Suitable for most applications.

3 - If you speak softly, or are in a quiet environment.

Note: When you connect a VOX accessory, the radio will

automatically be set to the last chosen VOX sensitivity level.