Motorola BLISS54-2 Kullanıcı Kılavuzu - Sayfa 21

Bebek Monitörü Motorola BLISS54-2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola BLISS54-2 30 sayfaları. 4.3" video baby monitor
Ayrıca Motorola BLISS54-2 için: Kullanıcı Kılavuzu (30 sayfalar)

Sayfayı Yazdır

The baby monitor system produces a high-pitched noise

• The Parent Unit and the Baby Unit are too close to each other. Make sure the

Parent Unit and Baby Unit are at least 3 feet away from each other.

• The speaker volume of the Parent Unit may be set too high. Decrease the

volume of the Parent Unit.

Battery pack in the Parent Unit is running low quickly

• The LCD brightness may be set too high. Try to decrease the brightness

level. Refer to section 4.2 for details.

• The volume level of the Parent Unit may be set too high, which consumes

power. Decrease the volume level of the Parent Unit. Refer to section 4.1 for

volume level settings.

Parent Unit image is not in color

• The Baby Unit is in a dark room, which causes the infra-red illumination to

turn on and the picture image to change from color to black and white.

When the room becomes brighter, the picture will return to color.

There is no transmission from the Baby Unit to the Parent Unit

• Switch on both the Baby and Parent Units.

• Pair the Baby Unit again as described in see "4.3.6 Add camera".

If there is no free camera location, delete a location first, as described in see

"4.3.7 Delete camera".

The Parent Unit is in standby

• To turn on the Parent Unit screen, press the ON/OFF button 0 briefly.

Troubleshooting