Motorola BP36S Kullanıcı Kılavuzu - Sayfa 19

Bebek Monitörü Motorola BP36S için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola BP36S 29 sayfaları. Motorola bp36s; mbp36s-2; mbp36s-3; mbp36s-4 digital video baby monitor

Sayfayı Yazdır

7. Help

Display

No display

• Try recharging or replacing the battery pack.

• Reset the units. Disconnect the battery pack of the parent unit and unplug

both the units' electrical power, then plug them back in.

• Is the unit turned on?

Press and hold the ON/OFF button

• Is the correct camera selected?

Change the camera number, if necessary.

• Is the video display turned on?

Press the VIDEO ON/OFF button

• When operating using batteries only, the Display will go blank after

5 minutes or 30 minutes or 60 minutes to save power (depending on video

on setting). The unit is still active and will give you audio alerts. You can

reactivate the screen by pressing any button.

Registration

If the Baby Unit has lost its link with the Parent Unit

• Try recharging or replacing the battery pack.

• If the Baby Unit is too far away it may be going out of range, so move the

Baby Unit closer to the Parent Unit.

• Reset the units by disconnecting them from the battery and electrical power.

Wait about 15 seconds before reconnecting. Allow up to one minute for the

Baby Unit and the Parent Unit to synchronise.

• See 2.4 Registration (Pairing), if there is a need to re-register the units.

Help

on the parent unit to turn it ON.

to turn it on.