Motorola EASE34-4 Kullanıcı Kılavuzu - Sayfa 12
Bebek Monitörü Motorola EASE34-4 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola EASE34-4 38 sayfaları. 4.3" wi-fi video baby monitor
Ayrıca Motorola EASE34-4 için: Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
2.4
Registration (Pairing)
The Baby Monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedures
below:
1.
Press the M button and the menu bar will pop up.
Press the < LEFT button or > RIGHT button until
2.
del/
add/
3.
Press the + UP button or - DOWN button to select
O button to confirm.
4.
Camera
/
- DOWN button to select the desired Camera, and press the O
button to start searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its camera location
(with a * against it) cannot be selected for a new registration.
5.
Press and hold the PAIR button on the back of the Baby Unit until the
Parent Unit finds the camera, beeps and PAIR OK appears on the screen.
The video from the camera will then appear.
NOTE
A camera can only be registered to one Parent Unit at any one time.
12
view/
scan menu will pop up.
/
/
will pop up. Press the + UP button or
is highlighted, and the
add, and press the
Getting Started