Motorola EASE35-3 Kullanıcı Kılavuzu - Sayfa 12

Bebek Monitörü Motorola EASE35-3 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola EASE35-3 27 sayfaları. 5" video baby monitor

2.3

Desktop Stand of the Parent Unit

• Flip out the stand on the back of the Parent Unit

• Recommend to rotate it by 90 degree to set up the desktop stand.

Step 1

2.4

The Baby Monitor is pre-registered to your Parent Unit. You do not

need to register it again unless the Baby Unit loses its link with the

Parent Unit.

To re-register your Baby Unit, or register a new Baby Unit, follow the

procedures below:

Press the M button and the menu bar will pop up.

Press the < LEFT button or > RIGHT button until

and the

del/

3. Press the + UP button or - DOWN button to select

press the O button to conﬁrm.

4. Camera

- DOWN button to select the desired Camera, and press the O

button to start searching for a camera unit.

Note: If a camera is currently paired with the Parent Unit, its

camera location (with a * against it) cannot be selected for a new

registration.

5. Press and hold the PAIR button on the underside of the Baby

Unit until the Parent Unit ﬁnds the camera, PAIR OK appears on

the screen. The video from the camera will then appear.

NOTE

A camera can only be registered to one Parent Unit at any one time.

Step 2

add/

view/

will pop up. Press the + UP button or

Reset button

scan menu will pop up.

is highlighted,

add, and

Getting Started