Motorola EASE44CONNECT-4 Kullanıcı Kılavuzu - Sayfa 12
Bebek Monitörü Motorola EASE44CONNECT-4 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola EASE44CONNECT-4 44 sayfaları. 4.3" wi-fi video baby monitor
Sayfayı Yazdır
2.4
Registration (Pairing)
The Baby Monitor is pre-registered to your Parent Unit. You do not
need to register it again unless the Baby Unit loses its link with the
Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the
procedures below:
1.
Press the M button and the menu bar will pop up.
2.
Press the < LEFT button or > RIGHT button until
and the
del/
3. Press the + UP button or - DOWN button to select
press the O button to confirm.
4. Camera
- DOWN button to select the desired Camera, and press the O
button to start searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its
camera location (with a * against it) cannot be selected for a new
registration.
5. Press and hold the PAIR button on the back of the Baby Unit
until the Parent Unit finds the camera, beeps and PAIR OK
appears on the screen. The video from the camera will then
appear.
NOTE
A camera can only be registered to one Parent Unit at any one time.
12
add/
view/
/
/
/
will pop up. Press the + UP button or
scan menu will pop up.
is highlighted,
add, and
Getting Started